Khairul_Tajudin

Make Turntable using MD10-POT Motor Driver

This tutorial is application of MD10POT motor driver that can be use directly from the board without programming. The turntable is produce using 3D Printing method...

Build 1KG RC Sumo Robot using MDDRC10

This is a RC Sumo Robot based on MDDRC10 Motor Driver. The sizes are 15cm(L) x 15cm(W) with below 1kg (weight). The spec is for 1kg Sumo Robot Competition..

A fatal esptool.py error occurred: Cannot configure port!

This tutorial is short summarizes on common issues with ESP8266 or ESP32 Arduino base boards. It usually happens while tinkering with Arduino IDE and ESP chips...

Peak Current vs Continuous/Rated Current

As an unloaded DC motor spins, it generates a backwards-flowing electromotive force that resists the current being supplied to the motor. The current through the motor drops as the rotational speed in..

Raspberry Pi: Control DC Motor using MDDS10

There are several methods to control DC motors using Raspberry Pi. The suitable method for your application depends on how many PWM outputs you have and what performance you expect out of those output..

Raspberry Pi: GUI with a Remote Desktop Connection

In the LED Blinking tutorial, we use serial command line and software PuTTY to give a command in the Raspberry Pi. For this tutorial, we will use Remote Desktop Connection as our interface to pro....