Accessories for Arduino

Accessories for Arduino
Show:
Sort By:
USB Micro B Cable -32% Best Seller

USB Micro B Cable

Searching for suitable USB cable to connect to Cytron UNO, Maker UNO, NodeMCU, micro:bit or Raspberry Pi Zero? Yup, you can get it here.This is USB 2.0 type A to micr..

$1.48 $1.00 Ex Tax: $1.00

Breadboard 8.5x5.5cm (400 Holes) -36%

Breadboard 8.5x5.5cm (400 Holes)

Are you a beginner in building circuit design?Breadboard is ideal for a beginner to learn in building the circuitry. The breadboard does not require soldering to make..

$1.05 $0.68 Ex Tax: $0.68

Male to Male Jumper Wire -36% Best Seller

Male to Male Jumper Wire

Male to male jumper wire 65 pcs pack. Including 4 different lengths:4 x 240mm 4 x 200mm 8 x 150mm 49 x 110mmPerfect for connecting circuits and doing..

$1.75 $1.13 Ex Tax: $1.13

Male to Female Jumper Wire

Finally we stocked this male to female jumpers as many of you have requested! It comes in 10 wires pack. These are 20cm long jumper wires terminated with female to male s..

$0.50 Ex Tax: $0.50

Raspberry Pi Universal Power Supply 5.1V 2.5A micro B

This is Official microUSB Power Supply Unit from Raspberry Pi Foundation !The official and recommended universal micro USB power supply for Raspberry Pi. We’ve tested..

$11.25 Ex Tax: $11.25

Female to Female Jumper Wire

This is an exclusive wire set! Come in 10 wires pack. These are 20cm long jumper wires terminated with female to female socket. Use these to jumper from any male header o..

$0.50 Ex Tax: $0.50

9V Battery Connector to DC Jack Arduino

This is a very useful connector, on one end is snap for the 9V battery, and another end is the standard DC jack (2.1mm). If you are using 9V battery to power your Arduino..

$0.23 Ex Tax: $0.23

USB B Type Cable

This is a standard USB 2.0 cable. This is the most common A to B Male-Male type peripheral cable, the kind that's usually used for printers. Compatible with most SFE desi..

$0.80 Ex Tax: $0.80

Acrylic Base Plate for Arduino Uno

Note: From 21st Oct 2019 onwards, the plate comes with additional mounting holes for different orientations of Arduino UNO.This is super simple to use yet low cos..

$1.05 Ex Tax: $1.05

Arduino Female Header 1x10 Ways

This is a 10-pin female header, with extra long legs, good for Arduino Uno R3 and Leonardo stacking shields. Pin are spaced by 0.1".  ..

$0.38 Ex Tax: $0.38

Arduino Female Header 1x6 Ways

This is a 6-pin female header, with extra long legs (10.5mm) -- great for stacking Arduino shields. Pins are spaced by 0.1"   ..

$0.25 Ex Tax: $0.25

Arduino Female Header 1x8 Ways

This is a 8-pin female header, with extra long legs (10.5mm)-- great for stacking Arduino shields. Pins are spaced by 0.1".  ..

$0.30 Ex Tax: $0.30

Traffic Light LED Module

Ever imagine how the traffic light works? Well, now you can do your own program for traffic light control with this Traffic Light LED module. Compatible with any microcon..

$0.98 Ex Tax: $0.98

Adapter 12V 2A (UK Plug) -11%

Adapter 12V 2A (UK Plug)

Why do you need a AC to DC adapter? The AC to DC adapter transforms the alternate current (AC) input to direct current (DC) output. For this device, it will converts ..

$2.53 $2.25 Ex Tax: $2.25

IC ATMEGA328P (With Arduinio bootloader) Best Seller

IC ATMEGA328P (With Arduinio bootloader)

Atmel's ATMega328P 8-Bit Processor in 28 pin DIP package. It comes with 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz w..

$3.75 Ex Tax: $3.75

PL2303HX USB to TTL Serial Cable

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USBSerial conversion chip and ..

$1.88 Ex Tax: $1.88

USB C to Type A Cable (1 Meter)

USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! USB-C has a minor..

$2.00 Ex Tax: $2.00

Adapter 12V 1A (UK Plug)

Why do you need a AC to DC adapter? The AC to DC adapter transforms the alternate current (AC) input to direct current (DC) output. For this device, it will convert t..

$1.98 Ex Tax: $1.98

9V Battery Holder With Switch+Cover+DC Jack

The Battery Holder is suitable for 9 Volt Batteries. The pro of having this battery holder is that it allows you to switch off power for Arduino without having to remove ..

$0.98 Ex Tax: $0.98

M3 PCB Stand with Magnet - Female (13x12mm)

Say you want to stick your Maker UNO or Raspberry Pi Zero W on to your refrigerator door, how you want to do it? Use double sided adhesive tape? That is kind of permanent..

$0.13 Ex Tax: $0.13