ICE Tower CPU Cooling Fan for RPI4 with Case

Availability: Discontinued

Buy locally from a partner

Country:
Description

Meet this super ICE Tower CPU Cooling Fan for Raspberry Pi! Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃. What an amazing cooling! Best of all, this cooling fan supports the new Raspberry Pi 4 Model B 1G, 2G, and 4G version. As some of you know, the powerful Raspberry Pi 4 Model B will generate quite a bit of heat even in idle mode, the temperature will rise even higher is it is under load. With the help of this super heatsink tower with a fan, you will never need to worry about the temperature :) It will keep your Raspberry Pi cool!

Check this video to install the ICE Tower Cooling Fan only (without Acrylic case), by ETA Prime:

 

Check this video to install the ICE Tower Cooling Fan only (with Acrylic case), by KEVIN DENG:

Note: Raspberry Pi board is not included

We have run the stress test on Raspberry Pi Model 4B 4GB with this ICE Tower. The test is carried out to compare the temperature performance of the Raspberry Pi 4 Model B's CPU temperature, Fan Off and Fan On. This is just one of the many methods you can use to benchmark the thermal performance of the enclosure or heatsink. The test consists of two parts which are cooling and continue with the stress test. The stress test loads the CPU to 100% and logs the temperature. We have also updated the EEPROM firmware of Raspberry Pi 4 Model B to 000137ad (date: 10 Sep 2019), the thermal performance improved significantly:

Note: The thermal paste/tape is VERY CRUCIAL for the thermal dissipation, please ensure it is properly stacked between the top case/heatsink and the CPU.

As you see from the chart, the ICE Tower is doing very great work in cooling the CPU (make sure the thermal paste is stacked properly), even without the fan! This ICE Tower keeps the CPU temperature around 55ºC during the full stress test!

Features:

  • Support Raspberry Pi 4 Model B:
  • Fan run-on 5VDC from GPIO of Raspberry Pi
  • ICE Tower Structure
  • 5mm copper tube
  • Superheat dissipation
  • Rated power of the cooling fan: 0.4W @5V, 0.08A

Packing List:

  • ICE Tower CPU Fan:
    • 2 x Steel Mounting Fixer (Fit for Raspberry Pi 4)
    • 1 x ICE Tower CPU fan
    • 8 x M2.5 x copper spacer/PCB stand/column
    • 4 x M2.5 Nut
    • 3 x Thermal Conductive Tape
    • 2 x M2.5 screw for mounting Steel Fixer to ICE Tower CPU fan
    • 1 x Tiny Screwdriver
  • 5 layers of Acrylic Case
    • 5 x Acrylic plate
    • 4 x M2 long screw
    • 4 x M2 spacer
Warranty Period: 12 months
Q & A (4)

Ask a question

Reviews
  • 4.9 out of 5
                  
  • 5
    90%
  • 4
    8.33%
  • 3
    0%
  • 2
    0%
  • 1
    1.67%
Sort By:

Tags: super heatsink