Note: Motor's warranty period is 3 months from the purchase date.
Wanted to use an RC servo motor on a 3.3V system like micro:bit or NodeMCU or NodeMCU 32, but most of the servo's operating voltage starts from 4.8V :( Well, not to worry, you are on the right page, this micro servo operates from 3.0V to 6.0VDC, supporting most of the controller operating voltage! Awesome!
This servo acts like the one in this video :)
Warranty Period: 3 months
Features
Let's look at the spec:
Operating Voltage: 3.0V~6.0VDC
Operating Speed:
0.12sec/60º (4.8V)
Stall Torque:
1.3kg.cm/18.09oz.in(4.8V)
Control System: Analog
Direction: CW and CCW
Operating Angle: 180 degrees
Required Pulse: 500us-2500us
Bearing Type: None
Gear Type: Plastic
Motor Type: Metal
Connector Wire Length: 20 cm
Brown: Ground
Red: Positive voltage (3.0V to 6.0VDC)
Orange: Control Signal, standard RC (Radio Control) signal
Build an Otto DIY robot Using Maker Pi RP2040. This board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. With this board, we can build the robot easily and..
This time, we will try to include actuator control and sensor’s reading in GUI. From the interface, user is able to control servo motor position and reading sensor’s data...
International
Singapore
Malaysia
Thailand
Vietnam
-800x800.jpg "Analog Micro Servo 9g (3V-6V)")
-800x800.jpg "Analog Micro Servo 9g (3V-6V)")
-800x800.jpg "Analog Micro Servo 9g (3V-6V)")
