Argon One Aluminum Multifunction Case V2 for RPi 4B

$31.23
Cashback: $0.94
  • 10 or more $28.10
  • 30 or more $24.98
  • Availability: 63

    Buy locally from a partner

    Country:
    Description

    Note: From 29 Mar 2021 onwards, the Argon One cases shipped are Argon One V2 Case.

     


     

    If you are looking for a perfect and elegant enclosure for your powerful Raspberry Pi 4 Model B single-board computer, you are on the right page! This Argon ONE Aluminum case has the highest rate among makers and the community.

     

    We performed a thermal stress test with Raspberry Pi 4 Model B 2GB together with this Argon One Aluminum Case and it stays cool even if the RPi4B is overclocked to 2.1GHz. Amazing heat dissipation!

    This Argon One Case applies both passive and active cooling mechanisms so that's why it can maintain the temperature below 50oC even with fan OFF! What an amazing cooling enclosure! Best of all, this cooling enclosure supports the Raspberry Pi 4 Model B 2GB, 4GB, and 8GB versions. As some of you know, the powerful Raspberry Pi 4 Model B will generate quite a bit of heat even in idle mode, the temperature will rise even higher if it is under load. With the help of this Argon One case with a fan, you will never need to worry about the temperature :) It will keep your Raspberry Pi cool!

     

    Check this review video out by ETA Prime as the unboxing, stress test and review this case:

    Note: This video is the review of the Argon One V1 Case.

    This case is compatible with the Raspberry Pi 4 Model B:

    Argon ONE is designed for Raspberry Pi 4 Model B that is made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics and functionality. It offers one of the best cooling solutions for Raspberry Pi 4. The case has an extension that connects to the processor with a thermal cooling pad so that heat from the processor is transferred to the case. This means that the case becomes a heatsink passively cooling the motherboard so that the computer can work without building up much heat. Also, the case comes with a built-in PCB board with a fan attached to actively cool the Raspberry Pi further. These two cooling systems combined guarantee long-lasting use without overheating. The fan speed can be configured easily at any time via the terminal. Also, it has front and rear vents for better airflow. Awesome!

    Ever dreamt of having a Power Button for your Raspberry Pi?

    Normally a Raspberry Pi gets powered as soon as you connect it to the power supply and does not have a power button onboard. No more dreaming and waiting - Argon ONE can change the way you interact with your Raspberry pi 4. With the power button installed on the case, you can easily turn on your Raspberry Pi and perform safe shutdowns, reboots and forced shutdowns.

    Assembling the case with the Raspberry Pi is very easy. Install the Argon ONE Script that unlocks the full functionality of the Argon ONE case. All the ports are accessed at the back, making it more manageable with minimal cable clutter and easy cleaning. This also makes it easy to tidy and pack up when on the move without compromising any ports of the motherboard.

    Color-coded GPIO Pins?

    The case was designed with one main purpose, protecting the Raspberry Pi without compromising the full functionality of the motherboard. The built-in PCB board extends the GPIO pins of the Raspberry Pi with the pins being color-coded to easily identify the pin functions. Also, the pins are clearly labeled for convenient use. When the pins are not in use, they’re covered and protected by a magnetic removable top. This makes the Pins accessible at all times, allowing the Raspberry Pi to be used in various electronics projects.

    The case comes with a top and bottom, 4 screws, a built-in PCB Board, a silicon cooling pad, and a PCB Board that extends the audio and micro HDMI ports. Assembling the raspberry pi with the case though is as easy as 1, 2, 3 or A, B, C. Combining the parts together is simple and intuitive. All that’s needed is a four-way screwdriver, and that’s just to tighten the screws to the bottom of the case. No special tools needed at all.

    After placing the Raspberry Pi and installing the OS on the SD Card, a one-line script needs to be keyed into the terminal so that the power button and fan can be used.

    Warranty Period: 12 months
    Features
    • Sleek Aluminum Alloy Enclosure
    • Built-in Power Button for safe shutdowns, reboots and forced shutdowns
    • Efficient Passive Cooling with the whole top part of the case being a heatsink
    • Built-in Fan with software-controllable fan speed
    • All the connectors are located at the back for neat cable management
    • Plastic Base for excellent Wi-Fi signal strength
    • Compatible with all Raspberry Pi 4 Model B board:
    • Easy Installation with magnetic removable top
    • Easily Accessible GPIO with color-coded pinouts
    • Dimensions: 106 x 95 x 34 mm
      Packing List
      • 1 x Argon ONE Aluminum Multifunction Case
      • 1 x Instruction Manual
      • 1 x HDMI - Audio PCB Extender
      • 1 x GPIO - Fan PCB HAT
      • 1 x Silicone Thermal Pads
      Resources

      Check out more reviews of Argon One V1 Case from other users:

      By ExplainingComputers:

       

      By The Review Suite:

      Q & A (6)

      Ask a question

      Reviews
      • 4.9 out of 5
                      
      • 5
        95.21%
      • 4
        2.99%
      • 3
        1.2%
      • 2
        0%
      • 1
        0.6%
      Sort By:

      Tags: Argon40, Passive, active cooling, enclosure, magnetic