Digilent Analog Discovery 2

Digilent Analog Discovery 2

  • Availability:
    Discontinued
  • Product Code: EQ-ANL-DIS2
  • Warranty Period: 12 months
Ever think of using logic analyzer or oscilloscope to troubleshoot your project? Now you can do it with Analog Discovery 2, an enhanced version of the previous Analog Discovery. It is super portable where you can bring it any place. Analog Discovery Kit is a oscilloscope, logic analyzer and function generator. It can plug to your laptop or desktop computer via USB and you are ready to use it.
 
Digilent Analog Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds. Developed in conjunction with Analog Devices and supported by Xilinx University Program, Analog Discovery 2 is small enough to fit in your pocket, but powerful enough to replace a stack of lab equipment, providing engineering students, hobbyists, and electronics enthusiasts the freedom to work with analog and digital circuits in virtually any environment, in or out of the lab. The analog and digital inputs and outputs can be connected to a circuit using simple wire probes; alternatively, the Analog Discovery BNC Adapter and BNC probes can be used to connect and utilize the inputs and outputs. Driven by the free WaveForms 2015 (Mac, Linux and Windows Compatible) software, Analog Discovery 2 can be configured to work as any one of several traditional instruments.
 
For more information on the differences between Analog Discovery and Analog Discovery 2, please visit the resource center.

Features:
  • Two-channel USB digital oscilloscope (1MΩ, ±25V, differential, 14-bit, 100Msample/sec, 30MHz+ bandwidth - with the Analog Discovery BNC Adapter Board)
  • Two-channel arbitrary function generator (±5V, 14-bit, 100Msample/sec, 20MHz+ bandwidth - with the Analog Discovery BNC Adapter Board)
  • Stereo audio amplifier to drive external headphones or speakers with replicated AWG signals
  • 16-channel digital logic analyzer (3.3V CMOS, 100Msample/sec)
  • 16-channel pattern generator (3.3V CMOS, 100Msample/sec)
  • 16-channel virtual digital I/O including buttons, switches, and LEDs – perfect for logic training applications
  • Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS)
  • Single channel voltmeter (AC, DC, ±25V)
  • Network analyzer – Bode, Nyquist, Nichols transfer diagrams of a circuit. Range: 1Hz to 10MHz
  • Spectrum Analyzer – power spectrum and spectral measurements (noise floor, SFDR, SNR, THD, etc.)
  • Digital Bus Analyzers (SPI, I²C, UART, Parallel)
  • Two programmable power supplies (0…+5V , 0…-5V). The maximum available output current and power depend on the Analog Discovery 2 powering choice:
    • 250mW max for each supply or 500mW total when powered through USB
    • 700mA max or 2.1W max for each supply when using an external wall power supply
Packing list:
  • Analog Discovery 2
  • One regular-sized project box (without sticker sheet)
  • One USB A to micro B programming cable
  • One 2x15 flywire signal cable assembly
  • 5-pack of 6-pin male headers
  • One ferrite cable snap-on
Software:
Documents:
 
Do check out the introduction video:
 
what is the warranty period? ( patrick, 24/07/2017 )
Hi, the warranty period is 6 months. Thanks.

Ask a question

Note: HTML is not translated!
DescriptionDate AddedSizeAction
Datasheet02/07/2019N/ADownload
Schematic02/07/2019N/ADownload
WaveForms 201502/07/2019N/ADownload
Resource Center02/07/2019N/ADownload
  • 0 out of 5
                  
Total Reviews (0)
  • 5
    0%
  • 4
    0%
  • 3
    0%
  • 2
    0%
  • 1
    0%

Tags: digilent, analog, discovery, oscilloscope, eq-anl-dis2, 410-321, USB Oscilloscope, 30 MHz