This is a low-cost 12V DC brush motor with 33mm diameter motor size. It comes with a 270:1 reduction gearhead that produces 1.37Nm torque, and no load speed of 16RPM. Very suitable to build a wheeled mobile robot and other robotic projects.
To control it, you need to get a proper DC motor driver that can cope with at least 2 Amp current because the motor may draw more than 1 Amp current when it is run in full load.
You may need a bracket to fix the motor at the desired location.
You should consider getting the plastic wheel if you are building a wheeled mobile robot.
Alternatively, get the metal key hub so that you can connect the motor shaft with a foreign part easily.
Rated voltage: 12VDC
- No load current: < 100mA
- No load speed: 16RPM
- Rated load torque: 1.37N.m(14kgf.cm)
- Rated current: < 650mA
- Rated load speed: 12RPM
Gear ratio: 270:1
Shaft: 6mm diameter x 15.5mm length
|Speed (RPM)||< 50RPM|
|Torque (kgf.cm)||10.01 - 20.00|