SPG30HP series is a high power range of SPG30 gear motor which provides higher speed and higher torque compared to its SPG30 sibling. But please note that higher power also means it will draw more current and consume more power.
We have been carrying SPG30 motor for quite some time and it serves the makers community well. This motor is mounted with a 10:1 gearhead that able to produce 49mN.m torque with 1100RPM (no load). The maximum current of this motor may exceed 5 Amp, so please make sure you drive it with a DC motor driver that can withstand at least 5 Amp current.
You may need a bracket to fix the motor at the desired location.
You should consider getting the plastic wheel if you are building a wheeled mobile robot.
Alternatively, get the metal key hub so that you can connect the motor shaft with a foreign part easily.
- Rated voltage: 12VDC
- No load current: < 0.3A
- No load speed: 1100 RPM
- Rated load torque: 49mN.m (0.5kgf.cm)
- Rated current: < 1A
- Rated load speed: 865 RPM
- Weight: 160g
- Gear ratio: 10:1
- Shaft: D-shaped with 6mm diameter, 15.5mm in length
- 1 x 12V 1100RPM 0.5kgfcm High Power Brushed DC Geared Motor
|Speed (RPM)||1001 - 2000|
|Torque (kgf.cm)||< 1kgf.cm|