[Holiday Notice] Please be informed that our office will be closed on September 16 in observance of a public holiday. Kindly note that all orders placed after 12:00 PM (GMT +8) on September 13 will be processed on September 17. Thank you for your understanding, and we apologize for any inconvenience caused.
Single-cell lithium base battery charger & protection module. The charging will be via a micro B connector. Lithium base battery includes Li-po and Li-ion battery as the charging and discharging characteristic is similar.
The USB micro B connector power input offers direct charging using widely available nowadays with power bank and also Android phone charger. With a maximum charging current of 1A, your battery can be charged faster and of course, do make sure the 5V input has sufficient power to provide more than 1A.
It comes with a TP4056 charging IC.
Here is an example of DIY 18650 Charger using a TP4056 Lithium Cell Charger Module by Tinker Man Mick:
This video shows In this video simple how to make an emergency 4v DC LED Light using 3.7v TP4056 Li-Ion Lithium Battery charger with Protection Board Charging Module - 5v Micro USB Interface by Power Gen:
Using the module:
Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on left-hand side of the module
Connect cell to charge to B+/B- pads on right-hand side of module
A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
Important! Disconnect load when charging
The red LED indicates chaging in progress, green LED indicates charging has finished.
Never charge your battery at a rate greater than 1C.
International
Singapore
Malaysia
Thailand
Vietnam
