-7% 3D Printer 1.75mm PLA Filament(Fluorescent Green)

3D Printer 1.75mm PLA Filament(Fluorescent Green)

    • $15.98
    • $17.25 -7%
  • Ex Tax: $15.98
    • 5 or more $15.50
    • 10 or more $13.75
  • Cashback: $0.48
  • CytronCash Balance: Login
  • Availability:
    25
  • Product Code: HD-PLA1.75-FG
  • Warranty Period: 12 months
  • Shipping:

Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the stock lasts.

Note: From 21 Feb 2020 onwards, this filament is from SunLu. Please check the photo to confirm.

This is a 1kg reel of 1.75mm PLA (Polylactic Acid) plastic filament for 3D printing. PLA is biodegradable and required lower printing temperature compared to the ABS plastic made it commonly used in prototyping, educational and architectural models.

This item comes with a box and vacuum sealed so that it can last longer even though being kept for a long time.

Did you know that filament can absorb water vapour? It can affect the printing quality if the filament stored in a humid place. Humid conditions and UV light speed up the breakdown of the filament which weakens it and causes inconsistent or poor quality prints. For example, when water is absorbed by the filament and it is heated by the 3D printer for extrusion, the water combined with heat makes steam (you will hear a hissing sound as steam is created). This causes the filament to bubble as it comes out of the hot end and leaves you with inconsistent surface on your print.  

To counter this problem, the filament was vacuum sealed and a Silica gel is placed inside it so that it can absorb remaining water vapour. The main purpose is so that the filament will always in a dry state.

Small tips from us, after opening the seal, make sure the filaments were stored in a confined dry place along with Silica gel (if you have many filaments).

Specification:

  • Fluorescent Green color
  • Filament thickness: 1.75mm
  • length: 325 meters
  • 1kg (2.2 lbs) of filament
  • Printing temperature 195°C to 230°C.

Note: The colour might be slightly different due to lighting effect.

Packing List:

  • 1 x 3D Printer 1.75mm PLA Filament (Fluorescent Green)
What brand is this? ( Muhammad Faiz bin Muhammad Fauzi , 19/08/2020 )
Hi, the brand is SunLu as stated on the product page. Thanks :)
Does this come with the spool ? ( Justin, 03/04/2020 )
Hi, yes. It comes as shown in the photos on the product page. Thanks :)

Ask a question

Note: HTML is not translated!
  • 5 out of 5
                  
Total Reviews (15)
  • 5
    100%
  • 4
    0%
  • 3
    0%
  • 2
    0%
  • 1
    0%

Tags: PLA filament 1.75mm