Arduino MKR WiFi 1010

Arduino MKR WiFi 1010

    • Login to view ProMaker's Insider Price!
    • $49.75
  • Ex Tax: $49.75
    • 5 or more $47.25
    • 20 or more $42.28
  • Cashback: $1.49
  • CytronCash Balance: Login
  • Availability:

Accessories you may need

Enter desired quantity before clicking 'Add to Cart' button

USB Micro B Cable

USB Micro B Cable

  • 10 or more $0.92
  • 100 or more $0.75

$1.00 Ex Tax: $1.00

  • Total accessories: $0.0
  • Grand total: 49.75

  • Product Code: ARDUINO-MKR-1010
  • Warranty Period: 12 months

The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.

See what Massimo Banzi, Arduino Co-founder, has to say about this board in the following video.

The board's main processor is a low power Arm® Cortex®-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family. The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range. On top of those, secure communication is ensured through the Microchip® ECC508 crypto chip. Besides that, you can find a battery charger, and a directionable RGB LED on-board.

Arduino is made to connect to a WiFi network as easy as getting an LED to blink. You can get your board to connect to any kind of existing WiFi network, or use it to create your own Arduino Access Point. The specific set of examples provided for the MKR WiFi 1010 can be consulted at the WiFiNINA library reference page.

Other than utilizing Arduino IDE, you can also use your Nano board on Arduino's IoT Cloud, a simple and fast way to ensure secure communication for all of your connected Things for a better digital making experience!

It is also possible to connect your board to different Cloud services, Arduino's own among others. Here are some examples on how to get the Arduino boards to connect to:

  • Blynk
    • simple project from the Arduino community connecting to Blynk to operate your board from a phone with little code
  • AWS IoT Core 
    • This example is made on how to connect to Amazon Web Services
  • Azure
  • Firebase

The communications chipset on the MKR WiFi 1010 can be both a BLE and Bluetooth® client and host device. Something pretty unique in the world of microcontroller platforms. If you want to see how easy it is to create a Bluetooth® central or a peripheral device, explore the examples at the ArduinoBLE library.

The MKR WiFi 1010 is a dual-processor device that invites experimentation. Hacking the WiFiNINA module allows you to, for example, make use of both WiFi and BLE / Bluetooth® at once on the board. Yet another possibility is having a super-lightweight version of Linux running on the module, while the main microcontroller controls low-level devices like motors or screens. These experimental techniques, require advanced hacking on your side. They are possible via modifying the module's firmware that you can find at Arduino's Github repositories.

Note: This kind of hacking breaks the certification of your WiFiNINA module, do it at your OWN RISK!

Its USB port can be used to supply power (5V) to the board. It has a Li-Po charging circuit that allows the Arduino MKR WiFi 1010 to run on battery power or an external 5-Volt source, charging the Li-Po battery while running on external power. Switching from one source to the other is done automatically.


  • Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
  • Radio module: u-Blox NINA-W102
  • Board Power Supply (USB/VIN): 5V
  • Secure Element: ATECC508
  • Supported Battery: Li-Po Single Cell, 3.7V, 1024mAh Minimum
  • Circuit Operating Voltage: 3.3V
  • Digital I/O Pins: 8
  • PWM Pins: 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)
  • UART: 1
  • SPI: 1
  • I2C: 1
  • Analog Input Pins: 7 (ADC 8/10/12 bit)
  • Analog Output Pins: 1 (DAC 10 bit)
  • External Interrupts: 8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2)
  • DC Current per I/O Pin: 7 mA
  • CPU Flash Memory: 256 KB (internal)
  • SRAM: 32 KB
  • EEPROM: No
  • Clock Speed: 32.768 kHz (RTC), 48 MHz
  • USB: Full-Speed USB Device and embedded Host
  • Length: 61.5 mm
  • Width: 25 mm
  • Weight: 32 g

Packing list:

  • 1 x Arduino MKR WiFi 1010 board


No questions have been asked about this product.

Ask a question

Note: HTML is not translated!
  • 5 out of 5
Total Reviews (1)
  • 5
  • 4
  • 3
  • 2
  • 1

Tags: Arduino, Genuino, IoT, SAMD21, WiFi