Arduino UNO WiFi Rev2.0 Dev Board

$69.98
Cashback: $2.10
  • 5 or more $68.58
  • 20 or more $66.48
  • Availability: 13

    Buy locally from a partner

    Country:

    Accessories you may need

    Description

    This is the latest Arduino UNO WiFi (Rev2.0) from Arduino.cc! Yes, all the way from Italy.

    Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiFi is functionally the same as the Arduino UNO Rev3, but with the addition of WiFi/Bluetooth and some other enhancements. It incorporates a brand new 8-bit microprocessor from Microchip and has an onboard IMU (Inertial Measurement Unit).

    The Wi-Fi Module is a self-contained SoC with an integrated TCP/IP protocol stack that can provide access to a Wi-Fi network, or act as an access point.

    The Arduino UNO WiFi has 14 digital input/output pins—5 can be used as PWM outputs—6 analog inputs, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with an AC adapter or battery to get started.

    Note: You might need a USB B Cable to load program and also power the board :)

    Note: The Arduino UNO WiFi Rev2.0 board comes with a nice transparent plastic base to protect it.

    Warranty Period: 12 months
    Features
    • Arduino UNO Wi-Fi development board with ATMEGA4809 8-bit microprocessor
    • Same as Arduino Uno Rev3 with the addition of Wi-Fi and some other enhancements
    • On-board IMU (Inertial Measurement Unit)
    • Secure ECC608 crypto chip accelerator
    • Self-contained SoC with integrated TCP/IP protocol stack
    • USB connection, a power jack, and an ICSP header
    • Powered by AC adapter or battery

    Specifications:

    • Microcontroller: ATMEGA4809
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7 - 12V
    • Digital I/O Pins: 14 - 5 Provide PWM Output
    • PWM Digital I/O Pins: 5
    • Analog Input Pins: 6
    • DC Current per I/O Pin: 20 mA
    • DC Current for 3.3V Pin: 50 mA
    • Flash Memory: 48 KB (ATMEGA4809)
    • SRAM: 6,144 Bytes (ATMEGA4809)
    • EEPROM: 256 Bytes (ATMEGA4809)
    • Clock Speed: 16 MHz
    • LED_BUILTIN: 25
    • Length: 68.6 mm
    • Width: 53.4 mm
    • Weight: 25 g
    Packing List
    • 1 x Arduino UNO WiFi Rev2.0 Dev Board
    Q & A

    Ask a question

    Reviews
    • 4.9 out of 5
                    
    • 5
      94.87%
    • 4
      5.13%
    • 3
      0%
    • 2
      0%
    • 1
      0%
    Sort By:

    Tags: WiFi, ATMEGA4809, Arduino WiFi, IoT