Argon EON 4-Bay Network Storage Case and RPi 4B Kits

    • $185.00 - $288.25
    • $199.75 - $312.75 -7%
  • Ex Tax: $185.00
    • Cashback: $5.55 - $8.65
    • CytronCash Balance: Login

    Available Options

    • Enclosure + RPi 4B 8GB
    • Enclosure + RPi 4B 4GB
    • Enclosure Only
    • Availability:
    • Product Code: V-AG4EON-PI4
    • Warranty Period: 12 months

    Note: These are options for the latest Argon EON 4-bay Network Storage Case, please choose your preferred kit under the Available Options:




    The Pi NAS Case is finally here. This Pi NAS case has been fully funded on Kickstarter, backed by over 1,000 backers.


    Argon 40 is again taking a daring step to uncharted territory and offers the Raspberry Pi community a more technically sophisticated accessory for daily computing needs: a Build Your Own Network Attached Storage (BYO-NAS).


    Check out the review, unboxing, and setting up of Argon EON (pre-production prototype) by ETA Prime:


    Check out another Unboxing, Building, and Setup by Raid Owl, receiving the final product:


    Argon EON, a 4 - Bay SATA NAS Enclosure, powered by the most versatile single-board computer. By the very nature and essence of the Raspberry Pi, the Argon EON is a Build Your Own Network Attached Storage (BYO-NAS).


    The cyberpunk-inspired design of the Argon EON made no compromises when it comes to both form and function. The space-grade aluminum allowed us to play around with ultra-modern and angular forms without compromising the rigidity and structural stability of the enclosure.


    The Argon EON also took advantage of the natural heat conductivity and dissipation of the aluminum to augment the built-in controllable fan to cool down both the Raspberry Pi and hard disks even at heavy loads.


    The programmable OLED Display is neatly situated under the multi-function power button to allow for seamless integration with the case. The OLED can display the Pi-NAS IP address, CPU status, and other functions needed for the operations.


    At the heart of the Argon EON are its 4-Bay SATA Hard Drive ports that will fit two (2) 3.5” SATA HDD and two (2) 2.5” SATA HDD/SSD. The maximum capacity of each HDD bay is 10 TB 18 TB for a total of 40 TB 72 TB capacity. Even though it can support up to 72TB (theoretically), it is managed by a USB 3.0 port, so if you really need a huge capacity NAS, we would recommend getting a good ready NAS with PCIe Bus. 


    One of the few limitations of the Raspberry Pi is to wake it up from sleep. But with the Real-time Clock built-in the Argon EON you can now schedule tasks previously not possible with a bare Raspberry Pi. This feature is now at your fingertips with the Argon EON.

    Note: The Coin Cell needed for RTC is either CR1220 or CR1225.  The coin cell battery is NOT INCLUDED in the original packaging.


    The design mantra is “Simple is beautiful.” and try to follow this to the last detail. The team has worked hard to keep the ports of the Argon EON neat and systematically situated at the back.


    The Gigabit LAN of the Raspberry Pi which will handle the network communications is easily accessible. Access to the push to eject microSD card is also at the back in case you would want to change your OS in an instant.

    The GPIO is one of the features of the Raspberry Pi that we fell in love with, so we always maintained that there should be access to this very useful and customizable yet simple interface.


    Because this Argon EON can support up to 4 hard drives, it is upgraded with a 12 volts 5 Amps Power Supply.


    Argon EON case is designed to work with a Raspberry Pi 4 Model B board and it will need one. So get the bundle with the Raspberry Pi 4 Model B if you do not have one yet.


    Raspberry Pi 4 Model B



    Features Specs:

    • Argon EON  4-Bay Network Storage Case
      • Build Your Own Network Attached Storage (BYO-NAS)
      • Operating System, as it is based on Raspberry Pi 4 Model B, quite a lot of compatible operating system
      • Takes advantage of the natural heat conductivity and dissipation of the aluminum
      • Augmented the built-in controllable fan to cool down both the Raspberry Pi and hard disks
      • Multi-function power button to allow for seamless integration with the case
      • Programmable OLED Display is neatly situated under the button to display the following:
        • IP address
        • CPU status
        • Storage status
      • 4-Bay SATA Hard Drive Ports that can fit two 3.5" SATA HDD and two 2.5" SATA HDD/SSD
      • Maximum Single Volume HDD/SSD Size: 18TB
      • Two full-size HDMI ports (extended out by a breakout board)
      • Utilize One USB3.0 port for 4-Bay SATA expansion, reserving 1 x USB3.0 and 2 x USB2.0 ports for other USB devices
      • A real-time Clock is built-in to make scheduling tasks possible:
        • It is compatible with CR1220 or CR1225
        • Coin Cell battery is NOT INCLUDED
      • All ports are on one side for neat cable management
      • microSD cards can be ejected by pushing them on the same port
      • Single Power Supply, by 12V 5A Power Supply (Included)
      • Dimension: 225 x 164 x 144 mm (H x W x D)
    • Raspberry Pi 4 Model B:
      • Broadcom BCM2711, 64-bit ARM Cortex-A72 (ARMv8), Quad-core, 28nm Processor SoC running @ 1.5GHz, with a metal body for better heat dissipation.
      • LPDDR4 SDRAM:
        • 8GB (Recommended for Argon EON)
        • 4GB (Recommended for Argon EON)
        • 2GB
        • 1GB
      • 2 x USB3.0 Port + 2 x USB2.0 Port
      • Expanded 40-pin GPIO Header
      • Video/Audio Out:
        • 4-pole 3.5mm connector
        • 2 x micro HDMI port, support 4Kp60 video, dual display
        • Raw LCD (DSI)
      • Image/Camera input: CSI port
      • Storage: MicroSD
      • True Gigabit Ethernet, >900 Mbps
      • Power-over-Ethernet (PoE) support (requires separate PoE HAT)
      • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 5.0 and BLE (Bluetooth Low Energy)
      • Low-Level Peripherals:
        • 27 x GPIO
        • UART
        • I2C bus
        • SPI bus with two chip selects
        • +3.3V
        • +5V
        • Ground
      • Power Requirement, 5V/3.0A via USB type C connector.
      • Supports Raspberry Pi OS, and check 3rd party Operating System here.
      • Dimensions: 85mm x 56mm x 17mm

    Packing List:



    • Argon EON 4-Bay Network Storage Case
      • 1 x Argon EON 4-Bay Network Attached Storage Case
        • 1 x Argon EON 4 Bays Network Storage Case
        • 1 x 12V 5A Power Supply with UK Plug
        • 1 x Screw Driver (changeable tip, Flat or Phillips), together with a USB bridge, and some screws
        • 1 x Instruction Manual



    Q & A

    No questions have been asked about this product.

    Ask a question

    Reviews (3)
    • 4.7 out of 5
    Total Reviews (3)
    • 5
    • 4
    • 3
    • 2
    • 1

    Tags: Argon 40, NAS, Raspberry Pi, Open Media Vault, Raspberry Pi 4 Model B 8GB, 8GB, 4GB, Pi4 8G, Pi4 4G, 4G, 8G