-88% AVR USBASP Programmer

AVR USBASP Programmer

  • Availability:
  • Product Code: AVR-USBASP
  • Warranty Period: 12 months
*AVR-USBasp is now in revision 2.0 with Arduino compatible 6 way cable.
This programmer is to program Atmel AVR microcontroller. Please check the list in User Manual for supported microcontroller. This USBasp programmer is modified from the Thomas Fishl USBasp Design. Since the Thomas's design is an open source hardware project, you can download all the information inclucing schematic and pcb document from Thomas's website. 
Tested on Window 8, please refer to this link, How to Install USBasp on Window 8
  • Works under multiple platforms. Linux, Mac OS X and Windows are tested.
  • No special controllers or smd components are needed.
  • Programming speed is up to 5kBytes/sec.
  • SCK option to support targets with low clock speed (< 1,5MHz).
Does it support programing ATmega 8535 processor? ( George, 07/02/2020 )
Hi, yes it does support ATmega 8535 processor. Thanks :)
How many day about the post this to the pahang state ? ( Azmin, 01/05/2019 )
Hi, postage will takes 1-2 working days. You may refer to this link for more details.
is it can support AT89C52? ( HIs, 01/12/2016 )

Hi, I think this  AT89C52 cannot be supported because it is not on the list.

Thanks. =)

Is this programmer support Atmega 16A? ( Hii Tien Ming, 14/11/2016 )

Did not see ATmega16A in the supporting list, sorry.

hi, may i know is it compatible with adafruit's product? because i plan to use it on atmega32u4. maybe this link will be more detail https://learn.adafruit.com/gps-dog-collar/overview ( kelvin, 12/05/2016 )

Hi, It does not support for Atmega32u4. Thanks :)

Upload the code was successful but when run the microcontroller , it doesn't show any output. What is actually the problem? I just try for LED blinking output ( Sukuri, 16/03/2016 )

Hi, Can you provide us more information? You can share the detail such as photo of hardware setup and etc. in our technical forum as this session is only for short inquiry. Thanks. :)

When i key in avrdude -c usbasp -p m32 ,it show error : program enable:target does not ansswer . Does this mean my USBasp is spoilt? ( Jun Seen, 10/05/2015 )

Not necessary, it might be the MCU or the circuit connection. Please do share the hardware and more information in our technical forum as this section is for short inquiry, thanks :)

Can I burn Atmega32-A with this USBasp? ( Jun Seen, 08/05/2015 )

Yup, according to the User's Manual, there is Atmega32 in the list.

We would need driver software for Windows *, that will be very much helpful. Please advice ( Joe, 25/03/2015 )

Er? The link of how to install driver for Win 8 is right under the description.

what asp meaning? ( nnw, 22/03/2015 )

Not sure, the USBASP is from Thomas Fishhl :) Maybe googling the Internet might help.

Ask a question

Note: HTML is not translated!
DescriptionDate AddedSizeAction
User's Manual V1.0 Oct 201119/02/2020N/ADownload
User's Manual V1.1 Dec 201319/02/2020N/ADownload
Fritzing File19/02/2020N/ADownload
AVR-USBasp Driver19/02/2020N/ADownload
Fritzing Tutorial19/02/2020N/ADownload
  • 5 out of 5
Total Reviews (23)
  • 5
  • 4
  • 3
  • 2
  • 1

Tags: AVR-USBASP, AVR USBASP Programmer, Ardiono, Accessories, ARDUINO-UNO avr, usbasp, programmer, arduino, accessories, avr-usbasp