[Holiday Notice] Please be informed that our office will be closed on September 16 & 17 in observance of a public holiday. Kindly note that all orders placed after 12:00 PM (GMT +8) on September 13 will be processed on September 18. Thank you for your understanding, and we apologize for any inconvenience caused.
*Starting from May 15, Shield-G15 is shipped in Rev2.0. Please refer to Rev2.0 User's Manual.
Cytron G15 Shield is a shield for controlling Cytron’s G15 Cube Servo and Robotis Dynamixel AX-12 (removed in Rev2.0) servo motor. It is compatible with CT-UNO, Arduino UNO, Arduino Duemilanove, Arduino Mega, Arduino Leonardo and possibly other pin compatible main boards. This shield has two four ports for Cytron’s G15 Cube Servo and two ports for Robotis’ Dynamixel AX-12 servo. G15 is serial servo. Hence more than one servo can be daisy-chained in series. User may choose to supply the servo motor from Arduino's VIN or the External Power port of Cytron G15 Shield. It also has stackable side headers which allows other Arduino shields to be stacked on top of it.
We have developed the library and example sketch for G15.
* For Rev1.0, please disconnect G15 from the shield during program loading (Arduin UNO or Mega) as the G15 will receive Arduino program too.
*For Rev2.0, please use software serial pin (D2, D3, D8, D9, D10, D11) when load program into Arduino.
Rev 1.0
Rev 2.0
2 x G15 ports, 2 x AX12 Ports
4 x G15 Ports
(AX12 Ports has been replaced by G15 Ports)
Control pin:(selectable using mini jumper)
1) D3, D9 - G15 Control pin
2) D2, D8- AX12 Control pin
Control pin:(Selectable using mini jumper)
D2, D8 - G15 Control pin
Hardware Serial :
D0 (Rx), D1 (Tx)
Hardware Serial :
D0 (Rx), D1 (Tx)
Software Serial:
Tx: D3, D9, D11
Rx: D2, D8, D10
Cytron G15 Shield comes with:
Arduino reset button
2 4 x G15 Cube Servo ports.
2 x AX-12 Dynamixel AX12 servo ports (Rev2.0 does not come with Dynamixel port).
External power port for servo with polarity protection
Stackable I/O header pin
Selectable digital pins for the control pin with mini jumpers
TX and RX indicator LEDs to show communication activities, only on Rev2.0.
Selectable Serial pins, Either hardware serial or software serial via mini jumpers, only on Rev2.0
International
Singapore
Malaysia
Thailand
Vietnam
