Description
Now, this is the Genuine Arduino Mega from
Arduino.cc. Since we are outside USA, so we need to call it Genuino Mega. As far as we know, Genuino is the combination of Genuino (original) + Arduino, so there you go.
The Mega 2560 is a microcontroller board based on the
ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable (B type, sold separately) or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.
The Mega 2560 is an update to the
Arduino Mega, which it replaces.
Getting Started
You can find in the
Getting Started section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics.
Features and Specifications:
Microcontroller: ATmega2560
Operating Voltage: 5V
Input Voltage (Recommended): 7V to 12VDC
Input Voltage (limit): 6V to 20VDC
Digital I/O pins: 54 (of which 15 provide PWM output)
Analog Input pins: 16
DC current per I/O pin: 20mA
DC current for 3.3V pin: 50mA
Flash memory: 256KB (of which 8KB is used for Bootloader)
SRAM: 8KB
EEPROM: 4KB
Clock Speed: 16MHz
Dimension: 101.52mm (L) x 53.3mm (Witdh)
Weight: 37g
Documents:
Tutorials:
Do feedback to us if you need other accs and shields.
Warranty Period: 12 months
Resources
Pin Mapping ATmega2560 | |
Schematic | |
Arduino IDE | |
Tags: genuino,
mega,
2560,
rev,
genuino-mega2560,
arduino