Out Of Stock Infrared Sensor Module

Infrared Sensor Module

    • $0.48
  • Ex Tax: $0.48
    • 10 or more $0.45
    • 30 or more $0.40
    • 100 or more $0.38
  • Cashback: 3%
  • CytronCash Balance: Login
  • Availability:
    Out Of Stock
  • Product Code: SN-IR-MOD
  • Warranty Period: 12 months
  • Shipping:

This Infrared obstacle/object detection sensor is super easy to use. It comes with on board potentiometer to adjust the sensitivity. The output is digital signal so it is easy to interface with any microcontroller such as Arduino/Genuino UNO, Mega, Leornado, Zero, 101, even the Raspberry Pi or Raspberry Pi Zero. And of course it is also compatible with all other controller boards out there including CIKU, CT-UNO, CT-ARM, etc. This Infrared sensor offers simple, user friendly and fast obstacle detection via infrared reflection, it is non contact detection. As it is based on light reflection, the detection do vary with different surface. And any infrared source might also interfere the detection.


It comes in a pair of Infrared emitter and receiver at the front of module, whenever there is object blocking the infrared source, it reflects the infrared and the receiver get it and the signal go through a comparator circuit on board. And depending on the threshold that being adjusted, it will output logic LOW at output pin and the green LED will light up to indicate the detection. Turning the on board potentiometer clock wise will increase the sensitivity and further increase the detection range. Compatible with 5V or 3.3V power input.
 
Features:

  • Input Power: 3.3V or 5VDC.
  • 3 pin interface which are OUT, GND and VCC:
    • OUT is digital output pin from sensor module, please connect to any digital input on your microcontroller. Will output logic LOW when object is detection.
    • GND is where you connect to your controller ground, or 0V.
    • VCC is the +ve supply, connect to either +3.3V or +5V.
  • Two LED indicators, one (Red) as power indicator, another(green) as object detection indicator.
  • Obstacle detection range: 2cm to 10cm
  • Adjustable sensitivity with on board potentiometer, this translate to adjustable detection range.
  • Detection angle: 35 degree
  • Small size makes it easy to assembly.
  • Single bit output.
  • Compatible with all types of microcontrollers.
  • Dimension: 3.1cm x 1.5cm

Getting Started with Infrared Sensor Module

This video shows howInfrared Sensor Module work. Please refer to the product page for more info: https://www.cytron.com.my/p-sn-ir-mod?search=IR%2520sensor&description=1&page=2

Hi..can this sensor detect water ? ( Ainudin, 23/07/2020 )
Hi, it is not suitable to detect water. You may refer to this link for ultrasonic sensor. Thanks :)
This sensor can detect flame?? ( sasi, 18/02/2020 )
Hi, you may refer to this product for flame detection. Thanks :)
What are the physical dimensions of this sensor PCB? Please provide length and width. ( Abe, 03/01/2020 )
Hi, here's the dimension: 3.1cm x 1.5cm . Thanks :)
Can this sensor measure the height of object? Or is there other better alternative? ( Anonymous, 12/10/2019 )
Hi, for hight measurement you may consider ultrasonic sensor.
When will be the stocks available? ( David, 03/10/2019 )
Hi! This item will be restocked in 2 weeks time. Thanks :)
Hi, when will the stocks be available? ( David, 03/10/2019 )
Hi! This item will be restocked in 2 weeks time. Thanks :)
If any animal or bird comes in front of the sensor what happens to the ir sensor ( Sunandha, 28/08/2019 )
Hi, the working principle of this sensor is to transmit an infrared signal, this infrared signal bounces from the surface of an object and the signal is received at the infrared receiver.
Hi, can I change the sensitivity of this module?
For example, can I make the module give a low output only when it detects a highly reflective material (such as reflective tape) rather than just any object.
( Andrea, 22/08/2019 )
Hi, you may adjust the sensitivity with the onboard potentiometer, this translate to adjustable detection range.
Do you have a sensor that will work a t 6 - 8 meters ( Mark Vander, 11/08/2019 )
Hi, sorry we don't have that
can i use this kit to measure the rpm
( shamsuri yusof, 24/04/2019 )
Hi, to measure the speed we advise you to use this Rotary Encoder Kit . Thanks

Ask a question

Note: HTML is not translated!
  • 4.9 out of 5
                  
Total Reviews (95)
  • 5
    92.63%
  • 4
    6.32%
  • 3
    0%
  • 2
    0%
  • 1
    1.05%

Tags: Infrared Sensor, Arduino, Line following, IR Sensor, sensor