📘Learn Digital Making weekly on Telegram. Join Channel Now📱
Input Shield V2

Input Shield V2

  • Brand: DFRobot
  • Product Code: SHIELD-INPUT2
  • Availability:
  • Warranty Period: 12 months
  • Login to view ProMaker's Insider Price!
  • $14.25
  • Ex Tax: $14.25
  • Price in reward points: 2280
  • 5 or more $13.68
  • 10 or more $12.83
  • Cashback: $0.43
  • CytronCash Balance: Login
This Arduino Input Shield V2.0 includes a two axis mini joystick (with momentary switch at center) as well as four colored push buttons(Red,Yellow,Blue,Green). The Xbee interface is deisgned to facilitate the realization of wireless rocker button controller. The shield can be easily stacked on top of your Arduino boards.

  • Dual axis mini joystick
  • Connects to your Arduino using male to male pin headers
  • Comes with 4 colored push buttons
  • The use of high-quality potentiometers and the PS button rocker The rocker output an analog signal is to achieve vertical and horizontal control, which is attached to four keys at the same time. 
  • The use of stack design is so that the plug can easily on Arduino Duemilanove or Uno.
  • The remaining unused ports are extended out of standby.
Can I use BlueBee with this input shield? ( Michael Tan Loong Peng, 03/07/2019 )
Hi, yes you can. Thanks.
Can XBee mounted directly on the top of it? ( Anonymous, 25/01/2016 )

Hi, Yes. You can just stack the XBee on top of it. Thanks. :)

Good day, I've problem with the DOWN button as it seems so hard to control. If not mistaken the shield actually ground the pin A1 when DOWN button is pressed right? By using if(analogRead(A1)==0) condition the LED blink at a very fast rate. I tried using digitalRead to convert into binary and it lights up no matter i press or didnt press the button. I believe the button always alternating between 0-511 analog value. Can I know is there anyway to solve this problem? ( Vincent Hoong Yong Sheng, 23/01/2016 )

Hi. Yes, it is true that DOWN button will connect to ground when pressed. You can use either analog read or digital read, but its recommended to use digital read. Value for analog is 0 or 1023 and LOW or HIGH for digital. You need to put some delay in your coding. Kindly visit technical forum for further inquiry as this session is only for short inquiry. Thanks. :)

Hello, can this shield integrate with Arduino Mega? any info for the connection? ( Azfar, 11/12/2015 )

Hi. Yes. It can be interface with any microcontroller with digital input such as Arduino series. You can refer to user manual for the pin assignment. Thanks. :)

hi its I can use the push button as function such as pick or place ? thanks ( lee tek long, 25/12/2014 )

Not really understand your question, push button is just digital input, you still need to develop sketch(program) to read the button and react. Please do continue the discussion in our technical forum as this section is for short inquiry, thanks :)

Ask a question

Note: HTML is not translated!
DescriptionDate AddedSizeAction
Input Shield V2 Library13/02/2020N/ADownload
Input Shield V2 - Getting Started Guide13/02/2020N/ADownload
  • 0 out of 5
Total Reviews (0)
  • 5
  • 4
  • 3
  • 2
  • 1

Tags: input, shield, shields arduino, shield-input2