IO Board with PoE for Raspberry Pi Compute Module 3

$49.50
Cashback: $1.49
  • 10 or more $44.55
  • 30 or more $39.60
  • Availability: 6

    Buy locally from a partner

    Country:
    Description

    This is the IO Board with PoE (Power Over Ethernet) for compact Raspberry Pi board - Compute Module. The perfect composite breakout board for developing with Raspberry Pi computer module:

    Note: The Compute Module is not included, please get it separately.

    The Compute Module PoE Board is a development board that you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. With the PoE (Power over Ethernet) feature, and versatile onboard peripheral interfaces, it is suitable for evaluating the Raspberry Pi compute module, also is an ideal choice for end products.

    What's on Board:

    1. Compute Module interface: for connecting Compute Module (CM3 / CM3L / CM3+ 8G / CM3+L)
    2. Raspberry Pi GPIO header: for connecting Raspberry Pi HATs
    3. PoE enabled Ethernet port: 10/100M auto-negotiation, for connecting router or switch with PoE function
    4. DSI interface: display ports, for connecting Raspberry Pi LCD
    5. USB ports: 4x USB ports, for connecting USB devices
    6. CSI interface: 2x CSI camera ports, for connecting Raspberry Pi Camera
    7. HDMI port
    8. USB TO UART interface: for serial debugging
    9. USB SLAVE interface: allows you to burn system image into Compute Module 3/3+
    10. Power port: 5V 2.5A
    11. TF card slot (bottom side): insert a Micro SD card with pre-burnt system, to start up Compute Module 3/3+ Lite variant
    12. Cooling fan interface
    13. LAN9514 (bottom side): fully-integrated USB hub and 10/100M Ethernet controller
    14. Si3404 PoE power management chip (bottom side)
    15. CP2102 USB TO UART converter
    16. EP13 PoE power transformer
    17. Optical isolator
    18. Two LED indicators:
      1. Red: Raspberry Pi power indicator
      2. Green: Raspberry Pi operating status indicator
    19. NET network indicator
    20. VGx power config jumper: config the I/O level
    21. UART output config:
      1. Left: connect the CP2102 serial port and Raspberry Pi serial port
      2. Right: disconnect the CP2102 serial port and Raspberry Pi serial port
    22. Cooling fan config:
      1. P34: the fan is program-controlled via P34 pin
      2. EN: the fan is directly powered from 5V power supply
    23. PoE config:
      1. DIS: disable PoE
      2. EN: enable PoE
    24. PoE power voltage measuring pads

    Example:

    Note: The compute module in the photo is NOT included.

    Dimensions:

    Warranty Period: 12 months
    Features
    • Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs
    • 10/100M auto-negotiation Ethernet port, with PoE enabled
    • 4 x USB ports, allows connecting more USB devices
    • 2 x CSI camera interfaces
    • Onboard HDMI / DSI interfaces for connecting displays
    • Onboard USB TO UART, for serial debugging
    • Cooling fan interface, auto run on power-up OR controlled by IO pins
    • Adopts isolated SMPS (Switching Mode Power Supply)

    Specifications:

    • Power supply: micro USB port / PoE Ethernet port
    • PoE power input: 37V ~ 57V DC in
    • PoE power output: 5V 2.5A DC out
    • Network standard: 802.3af PoE standard
    • Dimensions: 114mm × 84.4mm
    • Mounting hole size: 3.2mm
    Q & A

    Ask a question

    Reviews
    • 5 out of 5
                    
    • 5
      100%
    • 4
      0%
    • 3
      0%
    • 2
      0%
    • 1
      0%
    Sort By:

    Tags: PoE, IEEE 802.3af, Power Over Ethernet, Computer Module, RPi