We still deliver orders as usual. Due to current covid-19 situation, all shipment may experience slight delay.
Maker Line: Simplifying Line Sensor For Beginner

Maker Line: Simplifying Line Sensor For Beginner

  • Brand: Cytron
  • Product Code: MAKER-LINE
  • Availability:
    212
  • Warranty Period: 12 months
  • Login to view ProMaker's Insider Price!
  • $9.90
  • Ex Tax: $9.90
  • Price in reward points: 1584
  • 5 or more $9.41
  • 20 or more $8.91
  • 50 or more $8.42
  • Cashback: $0.30
  • CytronCash Balance: Login

Accessories you may need

Enter desired quantity before clicking 'Add to Cart' button

  • Total accessories: $0.0
  • Grand total: $9.9

 

Building a line following robot for a school project or competition? Or building an Automated Guided Vehicle (AGV) for industrial use? Maker Line is the right sensor for you. With 5 x IR sensors array, it is able to track line from 13mm to 30mm width. Line color is selectable as light (White) or dark (Black) line.

The sensor calibration is also simplified. Adjusting the potentiometer for each IR sensor is not needed anymore. Instead, press the calibrate button for 2 seconds to enter calibration mode, sweep the sensors array across the line, press the button again and you are done. The calibration data is saved in EEPROM and it will still intact even the sensor has been powered off. Thus, Calibration only needs to be carried out once unless the sensor height, line color or background color has changed.

Maker Line also supports dual outputs: 5 x digital outputs for the state of each sensor independently which is similar to conventional IR sensor, but you get the benefit of easy calibration; One analog output where its voltage represents the line position. Analog output also offers higher resolution compared to individual digital outputs. This is especially useful when high accuracy is required such as building a line following robot with PID control.

Features:

  • Operating Voltage: DC 3.3V and 5V compatible (With reverse polarity protection).
  • Recommended Line Width: 13mm to 30mm.
  • Selectable line color (light or dark).
  • Sensing Distance (Height): 4mm to 40mm (Vcc = 5V, Black line on a white surface).
  • Sensor Refresh Rate: 200Hz
  • Easy calibration process.
  • Dual Output Types: 5 x digital outputs represent each IR sensor state, 1 x analog output represents line position.
  • Support wide range of controllers such as Arduino, Raspberry Pi, etc.

Example Application: Line Following Mobile Robot for school project or competition, Automated Guided Vehicle (AGV)

Interface:

Dimension:

Documents:

Packing List:

  • 1 x MAKER-LINE
  • 2 x PCB Stand (Screw and Nut) 5mm
  • 2 x PCB Stand (Screw and Nut) 10mm
  • 2 x M3 Screw 4mm
  • 2 x M3 Nut

Write a review

Please login or register to review
how to put the maker line and castor? ( madi, 25/07/2019 )
Hi, in our tutorial we use a screw as the castor. You may modify the location of your line sensor to fit it with the robot that you use.
May I know if you have a sample code for the Line Following Robot or tutorial? ( Michael Tan, 14/07/2019 )
Hi, for now, we still don't have any yet. We will update on the product page once we have it

Ask a question

Note: HTML is not translated!
  • 5 out of 5
                  
Total Reviews (21)
  • 5
    104.76%
  • 4
    0%
  • 3
    0%
  • 2
    0%
  • 1
    0%

Tags: line following sensor, IR, infrared, white line, black