Manual Wire Wrapping Tool

$14.75
Cashback: $0.44
  • 3 or more $14.00
  • 5 or more $13.28
  • Availability: 7

    Buy locally from a partner

    Country:
    Description

    Wire wrapping is a mechanical interconnection technology that provides a reliable and safe connection for electronic circuits. Before the development of wire wrapping, soldering was the most common method to joint connections however the method has resulted in a variety of complications for applications.

     

    Wire wrapping terminal is involved in connecting stripped copper wires to the sharp corners of metal terminals to form electrical connections. The wire wrap tool is used to coil the bare wire tightly around the terminal using a large amount of tension and compression forces, resulting in a gas-tight and corrosion-safe connection.

    Step 1: Strip the 30 AWG wrapping wire by inserting

    the wire between the wire wrap tool's blades.

    Step 2: Pull the wire to remove the wire insulation.

    Expose about 1-inch of wire for wrapping

      

    Step 3: Insert the exposed wire into the hole

    at the longer shaft of the wrapping tool.

    Step 4: An example case using male header pins on the breadboard.

    Insert the wire into the header pin as shown.

      

    Step 5: Rotate the tool clockwise to begin wrapping the wire around

    the square header pin. Hold the wire with your other hand

    and rotate until all wires are wrapped around the pin.

    Step 6: Remove the tool from the pin once completed.
      

    Step 7: To disconnect the wire from the pin, use the shorter

    end of the tool and rotate it in a counterclockwise direction.

    Step 8: Once the wire wrap is loosened, pull the wire away from the pin.

     

    Warranty Period: 12 months
    Packing List
    • 1x Manual Wire Wrapping Tool
    Q & A

    Ask a question

    Reviews
    • 4.7 out of 5
                    
    • 5
      83.33%
    • 4
      0%
    • 3
      16.67%
    • 2
      0%
    • 1
      0%
    Sort By: