Motor Mount & 5 Inches Wheel Kit

Motor Mount & 5 Inches Wheel Kit

    • Login to view ProMaker's Insider Price!
    • $62.50
  • Ex Tax: $62.50
    • 5 or more $57.50
    • 20 or more $50.00
  • Cashback: $1.88
  • CytronCash Balance: Login
  • Availability:
  • Product Code: KIT-PW-5WL
  • Warranty Period: 12 months
  • Shipping:

Do you know power window motor? Yes, the motor that used in automobile, car to drive the window up and down when you press the control button. Because of its design and high torque, it is very suitable for robot and machine. Nonetheless, the shaft is not friendly enough to mount your wheel or mechanism. Yet, the use of power window motor to build combat robot is not strange for experienced robot builders. Many use welding or even customade coupling to mount the wheel.

The worm gear in the motor has the ability to prevent it rotating from the external force. In other words, it is difficult for your opponent robot to push your robot in the battlefield.

Why is worm gear so special? Check this wiki out: Worm Drive.

"Unlike with ordinary gear trains, the direction of transmission (input shaft vs output shaft) is not reversible when using large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually a single start (one spiral) worm is used. This can be an advantage when it is desired to eliminate any possibility of the output driving the input."

Here we make your life even easier by introducing this wheel kit where the motor is mounted to a 5 inches wheel made of thermoplastic rubber which provides absolute friction force on most of the surface. The product comes with a pair(Yes, two pieces, left and right) of power window motor attached with 5 inches wheel.

  • For Arduino lovers, you can utilize 10A shield to drive this motor.
  • For normal control, try MD30C (single channel) or MDDS30 (dual channels).
  • For RC (Radio Control) lovers, check out the MDDS30, smart drive dual-channel that accepts RC's signal.


  • Voltage Rating: 12VDC
  • Rated Speed: 60 RPM
  • Rated Torque: 2.9N.m (
  • Rated Current: <15A at 12V
  • Stall Torque (Locked): 9.8N.m (
  • Stall Current (Locked): <28A at 12V
  • The motor is is being tested to drive car's window:
    • Up and Down for 8 seconds, survive 10,000 times
    • Not meant for continuous driving without stopping
  • Motor dimension (w x l x h) : ~161.2mm x 30.3mm x105.5 mm, Detailed Drawing
  • Wheel Dimension

Packing list:

  • A pair of power window motor (left and right)
  • The wheels are mounted to power window motor.


Motor Specification
Speed (RPM)51 - 100
Torque ( - 30.00
Hello can i use( lipo 7.4V 220mAH battery) to run both right and left dc motors and connect to mdd10A ?
( AMIR, 17/09/2020 )
Hi, yes, but it is not suitable ya. This motor need 12V (11.1V lipo). Thanks :)
This Moto can support 100 kg? ( Siraj, 31/03/2020 )


Sorry, This motor can only support 30kg per 1cm

  • Torque:
When is the approximate time the product will be restock? ( Muhammad Zaki Hakimi bin Ahmad Maulana , 18/11/2019 )
Hi, it is estimated to be restocked in 1 month. Thanks :)
Is there an encoder on the motor? ( Thomas Larrea, 24/10/2019 )
Hi! We're sorry we do not have encoder on this motor. Thanks :)
Hi, may i know the weight of a Motor Mount & 5 Inches Wheel Kit? ( MOHD NAQIUDDIN ISMAIL, 13/10/2019 )
Hi! The weight is around 1870.7 g. Thanks :)
Hi Cytron, need your assist on this motor driver. I'm planning on using IC L293 as the motor driver but, i do realize that how small the amount of current that this IC able to hold which is around 2mA (MAX).
In this case, my project i think required the current to be around 5mA-20mA(MAX), so, do you have any suggestion for my motor driver IC that have the similar function with IC L293
for this motor?
( faridhul, 17/08/2019 )
Hi, you may consider Maker Drive: Simplifying H-Bridge Motor Driver for Beginner For more details please email your question to as here is for short inquiry only.
the wheel's is made of plastic or steel? ( kai, 08/12/2018 )
Hi, the wheel is made of thermoplastic rubber as mention in the description :) Thanks.
When will the stock be available? ( RF , 30/10/2018 )
Hi, we already update the stock :)
Hi, is the stick ready? How long it takes to deliver to jb and RM 265 is for only one motor or two motor? ( Rishi23, 08/08/2018 )
Hi, yes it is a ready stock as shown on the web. The price is for a pair of motor and it takes 1-2 working days to arrive at Johor. Thanks 
Do you have the part number for mating connector for the motors? ( Justin Bjorum, 29/05/2018 )
Hi, sorry we don't have mating connector for this product. Thanks.

Ask a question

Note: HTML is not translated!
  • 4.7 out of 5
Total Reviews (11)
  • 5
  • 4
  • 3
  • 2
  • 1

Tags: power windows, robot wheel, wheel kit, 5 inches wheel, kit-pw-5wl, combat robot, worm gear