PCIe M.2 M-Key HAT+ for Raspberry Pi 5

Note: NVMe 2242 M-Key MakerDisk SSD 512GB, 256GB, and 128GB shipped from 1st January 2024 onwards are loaded with the latest Raspberry Pi OS (64-bit) - Bookworm (release date: 5th December 2023). We have tested all capacities of MakerDisk NVMe 2242 with this PCIe HAT and Raspberry Pi 5, and they all work.

Note: The bootloader of Raspberry Pi 5 needs to be updated to Version: 30de0ba5 – 2024/01/5 to enable the NVMe driver and boot from it.  Please refer to this tutorial to update the bootloader of Raspberry Pi 5. Of course, you will need a microSD card to do that.

This PCIe HAT series unlocks the true potential of the Raspberry Pi 5 by leveraging its new PCIe interface. This innovative add-on board transforms your Raspberry Pi into a high-performance computing powerhouse, thanks to its compatibility with NVMe M.2 SSD.

Connect directly to Raspberry Pi 5 via PCIe Cable

Based on the 16 Pin PCIe Interface of Raspberry Pi 5

NVMe Drive Protocol Support

Compatible with 2230/2242 Size M.2 SSD

Support Gen 2 and Gen 3 Modes, Support Booting RPi5 from SSD

Onboard Dual LED Indicators

Easy to Monitor the Working Status

Onboard Power Monitoring Chip and EEPROM

Real-time Monitoring of SSD Power Status for More Stable Operation

Reserved Airflow Vent for Cooling Fan

Better Cooling Effect for RPi5 and SSD

Installation Guide

PCIe Speed Test with MakerDisk SSD

Default Setting, Gen 2

• Compatible with Raspberry Pi 5.
• FFC length is only 40mm.
• Supports installation of the official active cooler.
• Minimalist design, easy to install
• With LED indicators: 
  • PWR: Lights up when power on
  • ACT: Keeps blinking while reading/writing
• Support NVME Length:
  • 2230
  • 2242
• Dimension: 65mm x 56.5mm (L x W)

• PCIe HAT + MakerDisk SSD
  • 1 x PCIe HAT
  • 1 x NVMe 2242 M-Key MakerDisk SSD (based on your preferred capacity)
  • 1 x 2*20 Pin Header
  • 1 x 16Pin Cable (40mm)
  • 1 x Standoff Pack

• PCIe HAT Only
  • 1 x PCIe HAT
  • 1 x 2*20 Pin Header
  • 1 x 16Pin Cable (40mm)
  • 1 x Standoff Pack

• Wiki page, from Waveshare
• Updating Bootloader on a Raspberry Pi, tutorial by Cytron
• Installation guide and tutorial: