Note: This Beginner V2 Kit comes with 17.5W 5V 3.5A USB-C Universal Power Adapter - UK-EU-US Plug.
Note: This Beginner Kit is packed based on the Official Raspberry Pi Beginner Guide Edition 4 and it comes with the latest Raspberry Pi 4 Model B 1GB mainboard so you can kickstart your digital making and learning of Raspberry Pi right out of the box.
The Official Raspberry Pi Beginner Guide is a color-printed book with a comprehensive step-by-step guide for a total beginner. The printed copy of this guide is included in this kit:
The guide itself starts with the introduction of the Raspberry Pi board, explaining all the hardware ports that you might need to access later on. Here is the index page for you to get an idea of the content:
As you might have known, due to the higher power requirements, the Raspberry Pi 4 requires at least a 3.0A USB-C power supply. The kit included the Official Raspberry Pi 5V 3A USB-C Adapter with UK plug (type G) and is meant for the Raspberry Pi 4 Model B and is suitable to be used in Singapore, Malaysia, UK, etc.
The standard HDMI port that was part of the previous generation Raspberry Pi generation boards is replaced on the Raspberry Pi 4 by two Micro HDMI ports to provide dual monitor/display support. This beginner kit includes an official Micro HDMI to HDMI cable (1 meter) to provide the optimum media output resolution support.
The official case for Raspberry Pi 4 Model B in White/Red provides protection while maintaining the flexibility to access the GPIO with the ease of removing the top cover. This case is included in this kit.
We also include the microSD card needed for Raspbian and data storage. In fact, to save your time to download the Raspbian or NOOBS, we include a microSD card with NOOBS preloaded, saving the troubles you need to download and burn the image into the microSD card :) This
16GB microSD is an essential item for the Raspberry Pi to boot into Raspbian.
Well, as there are GPIOs on the Raspberry Pi board, it is a way to learn electronics too. The guide also comes with exercises to learn the basics of electronics circuits and programming using Sketch. For example, here is the example of a traffic lights project in the guide. We have included the jumper wires, LEDs,
Pushbuttons,
Buzzer, and
breadboard.
Schematic of Traffic Lights Project on page 139 in the Guide
Besides, the electronics, the guide also shows the use of Sense-HAT, the official HAT (Hardware Attached on Top). The Sense HAT is on the International Space Station now :) It comes with various types of sensors and outputs. Check out the introduction of SENSE-HAT from RaspberryPiIVBeginners:
Last but not least, this kit also includes the official V2 8MP (MegaPixel) camera module. Chapter 8 guides you to discover this camera module to take photos and also videos:
You might want to check out these accessories (in case you need any of it):
Warranty Period: 12 months
International
Singapore
Malaysia
Thailand
Vietnam
