RS232 GSM/GPRS Modem

RS232 GSM/GPRS Modem

    • Availability:
      Discontinued
    • Product Code: MOD-9001D
    • Warranty Period: 12 months
    GSM/ GPRS modem can be connected directly to your computer's serial port for wireless GSM communications including sending and receiving text messages. It can also be connected to your remote RS232 serial equipment allowing you to 'dial up' your system for remote management. This include data loggers such as Data Taker and Pace Scientific. GPRS connectivity also allows you to integrate this modem in your application for an 'always on' remote management system. Available with a built-in TCP/IP stack and you can easily create software to interface to the modem over your standard internet connection.

    Features:
    • Supporting both English and Chinese SMS data communication
    • Supporting 900/1800/1900 MHz Tri band
    • Status lights indication
    • Supporting AT Command Set
    • Serial port interface
    • Sim Card holder available
    Package including:
    • 9001D GSM Modem
    • Antenna
    • Serial port cable
    • AC-DC adapter
    • User Manual CD
    Casing Dimension: 6.4cm x 9.3cm x 2.5cm

    Tutorial:
    Hi.. Did this modem certified by SIRIM? ( Ahmad, 31/10/2017 )
    Hi, this modem don't have certification from SIRIM. Thanks.
    HI, I would like to know if this gsm can send MMS??? ( amir, 07/08/2016 )

    The MOD 9001D GSM/GPRS Modem mostly fits the need of data transfer, with SMS data communication, GPRS data navigation, Circuit Switch / Data Connectivity and TCP/IP protocol etc. This modem using SIM300Z chip for communication with service provider, Sim 300 can supporting AT command set like sending SMS, receiving call, receive SMS and data connectivity but not including MMS data communication. For MMS data communication, you can use modem that using SIM900 chip. For further inquiry, kindly visit our technical forum as this session is only for short inquiry. Thanks.smiley ?

    i cant connect the gsm directly to the laptop. it is because my laptop is 15 pin and the serial cable is 9 pin.can you suggest a cable or any ways to solve this problem.thank you ( yana, 30/11/2015 )

    Hi, You can use UART to RS232 Converter with UC00A or UC00B to connect the GSM to your computer. For further inquiry please continue the discussion in our technical forum as this session is only for short inquiry. Thanks :)

    im student.can i know the basic circuit the GSM moderm? i want know the basic circuit because my project use it. i hope u can help me. thank you, dear sincerly, faiz ( Muhammad Faiz Bin Seman, 16/08/2015 )

    Hi, you can refer to this tutorial as a reference to your project. This tutorial use SK40C +PIC16F877A as microcontroller. For futher inquiry you can discuss in our technical forum as there are more technical members for better suggestions. 

    HI, I would like to know which modification can be done to use the code to an crystal of 4MHz? i would like to know also if the code can be used for GSM SIM900D. ( ilidio Bucuane, 28/06/2015 )

    Hi, please contact our support team (support@cytron.com.my) with the explanation of the project or please do continue the discussion in our technical forum as this section is for short inquiry, thanks :)

    If use MOD-9001D and connect to URS232A with SK40C[pic16f877a] is it functioning by using the tutorial control and monitor via SMS and the coding from the attachment? ( firdaus, 08/05/2015 )

    Yup. The tutorial is based on this modem.

    Is it possible to connect p-mod 9001d to arduino as replace gsm/gprs shield by using uart in arduino uno? ( Khairul, 27/04/2015 )

    That is possible, but since MOD-9001D is not Arduino Shield, it is not stackable on Arduino main board. Besides the protocol is different so the example will need to be modified before it can be used on MOD-9001D. If you have further inquiry, please do discuss in our technical forum as this section is for short inquiry, thanks :)

    why my gsm siemens tc35 cannot detect port on hyperteminal? it's has another software to find port to detect port ( nurul amira, 08/02/2015 )

    Not really understand your question, The COM port is detected by computer not the GSM module. Are you using USB to Serial converter? Or you are connecting direct to DB9 com port of computer? Besides, is the baudrate correct? The jumpers on GSM module correct? Please do continue the discussion in our technical forum as this section is for short inquiry, thanks :)

    Ask a question

    Note: HTML is not translated!
    DescriptionDate AddedSizeAction
    User's Manual04/05/2017N/ADownload
    Flyer04/05/2017N/ADownload
    Sample Source Code with PIC16F877A04/05/2017N/ADownload
    GSM Modem AT Command Set04/05/2017N/ADownload
    • 0 out of 5
                    
    Total Reviews (0)
    • 5
      0%
    • 4
      0%
    • 3
      0%
    • 2
      0%
    • 1
      0%

    Tags: rs232, gsm/gprs, modem mod-9001d