Smarti Pi Touch PRO Case for 7-inch RPi Display-Black

Note: This is the latest SmartiPi Touch Pro case for the Official 7-inch Raspberry Pi Display and it supports the matching of Raspberry Pi 2, 3, and 4 mainboards. Please select the preferred option.

Case + Large + Small Back Cover + Display	Case + Large + Small Back Cover	Case + Large Back Cover Only	Small Back Cover Only

Note: The Raspberry Pi board is NOT included in the packing list.

The touch screen display gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems, and embedded projects!

Featuring a resolution of 800x480 pixels, 10 points capacitive touch, and a low price point, the display promises a lot. The 800x480 display connects via an adapter board that handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard will be integrated into the latest Raspbian OS for full functionality without a physical keyboard or mouse.

The SmartiPi Touch Pro is a case for the Official Raspberry Pi 7-inch Display and Raspberry Pi 2, 3, and 4. This case will keep your Raspberry Pi board and display organized and well protected. :)

Note: This case comes in two colors:

• Black (this product)
• White (coming soon)

A SmartiPi Touch Pro Case is a freestanding Raspberry Pi case designed to house your Raspberry Pi 7 LCD touch screen along with your Raspberry Pi board neatly behind it. Nobody likes the mess right? 

This case creates an all-in-one Raspberry Pi computer with a single USB-C port or Micro USB port in the back to power the components in the case.  The Raspberry Pi is mounted behind the display and the ports are flush with the edge of the display.  An included port cover for Pi 3 or 4 allows you to only allow access to the ports that you want to expose. There are also a second set of threaded mounting holes to mount your own development board or other pieces of hardware. Perfect for industrial or commercial applications where you want to add your own development board to the case. The case is made out of injection-molded ABS plastic to be drilled or machined for additional customization.

Note: Once assembled, the SD card, HDMI port, and audio jack are NOT accessible from outside. You can plug in an HDMI or audio cable into the Raspberry Pi inside the case and then run the wire outside the case.

There is also a mounting point below the display for the Official Raspberry Pi camera V2. The camera module holes can be completely hidden with the included adhesive panel. 

Note:

• Camera mounting is NOT compatible with the Raspberry Pi HQ camera.
• DO NOT have the plastic camera cover part installed when you apply the adhesive panel. The adhesive panel is permanent and non-removable.

The back cover of the case comes in two sizes, large and small. The large back cover will give you more than enough space to place a HAT on your Raspberry Pi board! If you want the case to be less bulky, the small back cover is for you :) Here's a video demonstrating how you can upgrade the large back casing to a smaller one:

Dimensions:

• Case internal panel:

• Case with large back cover: 

• Case with small back cover: 

• Raspberry Pi 7 Inch Touch Screen Display
  • Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)
  • Viewable screen size: 155mm x 86mm
  • Screen Resolution 800 x 480 pixels
  • 10 finger capacitive touch.
  • Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
  • The adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
  • Will require the latest version of Raspbian OS to operate correctly.
  • Compatible with:
    • Raspberry Pi 4B 1GB, 2GB, 4GB or 8GB RAM
    • Raspberry Pi 3 Model B, B+
    • Raspberry Pi 2
       
• Case with Large Back Cover
  • Included cooling fan with rubber vibration mounts
  • Two positions to mount the Raspberry Pi inside the case
  • Small panel to cover fan hole if not using a fan
  • Adjustable viewing angle
  • Works with all variants of Raspberry Pi:
    • Raspberry Pi 4 Model B 8GB
    • Raspberry Pi 4 Model B 4GB
    • Raspberry Pi 4 Model B 2GB
    • Raspberry Pi 3 Model B
    • Raspberry Pi 3 Model B+
  • Micro USB splitter for
    • Pi 2 and 3 (Micro USB input) 
    • Pi 4 (USB-C input)
  • Optional Raspberry Pi camera V1 or V2 mount included. 
    Note: NOT COMPATIBLE with the Raspberry Pi HQ camera.
  • The camera hole can be completely hidden permanently with included adhesive front panel 
  • The display can pivot down to 37 degrees off of the surface
  • Comes with a second set of threaded m2.5 mounting points that can be used to mount your own development board (HAT compatible mounting points)
  • Mounting:
    • Wall eyelets for wall mounting
    • 75 mm VESA mount pattern on the back cover
  • Works with HAT boards
  • The SD card, HDMI port, and audio jack are not accessible once the case is assembled. You can plug in an HDMI or audio cable into the Raspberry Pi inside the case and then run the wire outside the case.
     
• Small Back Cover
  • Fits the Smarti Pi Touch PRO Case perfectly.
  • Comes with fan mounting holes
  • 25 mm of clearance above the Raspberry Pi board. 
  • Mounting:
    • Wall eyelets for wall mounting
    • 75 mm VESA mount pattern on the back cover

• Case + Large + Small Back Cover + Display
  • Smarti Pi Touch PRO Case with Large Back Cover
  • Small Back Cover
  • Raspberry Pi 7 Inch Touch Screen Display

• Case with Large + Small Back Cover
  • Smarti Pi Touch PRO Case with Large Back Cover
  • Small Back Cover

• Case with Large Back Cover Only
  • Smarti Pi Touch PRO Case with Large Back Cover

• Small Back Cover Only
  • Smarti Pi Touch PRO Small Back Cover

• Assembly manual