USB 3.0 to M.2 NVMe/SATA B+M Key Case with USB-C Cable

Note: This M.2 case is compatible with both NVMe and SATA SSD.

Note: For the installation guide, kindly refer to the description below. There is no manual instruction provided in the packaging.

Some people must be tired of using small SD cards as memory space with low performance and specifications. It's time to change! Let's upgrade to SSD storage instead of using the normal SD card. The problem is most computer, smartphone, and Raspberry Pi does not have the socket for SSD storage. To overcome this problem, you just need a portable drive!

This USB 3.0 to M.2 NVMe B+M Key Case is compatible with our MakerDisk brand,

• NVMe 2280 M-Key MakerDisk SSD
• NVMe 2242 B+M-Key MakerDisk SSD
• SATA 2280 B+M-Key MakerDisk SSD

Plus, this case can be used with 4 variations of M.2 size (2230, 2242, 2260, 2280). It also comes with a USB C to USB 3.0 cable, so that you can directly connect to Raspberry Pi or any computer.

With this external M.2 NVMe storage, you can just boot the preferred Operating System for the Raspberry Pi 4 Model B direct from the USB! Interesting right? You just have to slot in your M.2 NVMe with preloaded Raspberry Pi OS and plug it into your RPi board. No driver is needed. Plug and play, straight out of the box. :)

Note: The NVMe 2280 M-Key MakerDisk SSD is NOT included in the packing list. If you're booting up your RPi from M.2 NVMe, be sure NOT to slot in your micro SD card.

Installation Guide

• Prepare all the parts of the case with a screwdriver (provided in the box). You can use NVMe or SATA SSD with any variations of M.2 size (2230, 2242, 2260, 2280).

• Plug in the SSD into the port. The other side of SSD will lifted up like in the picture below.

• Following the shape, place the golden nut to the SSD.

• Push the SSD and align with the screw hole.

• Flip to the back side of the case and mount the screw (according to the SSD size).

• Follow this position to slide in the outer enclosure.

• Connect the USB cable and you are good to go!

• Using NVMe high-speed technology 
• USB3.1 Gen 2 interface, transmission speed up to 6Gbps / 10Gbps
• Aluminum alloy shell, durable, easy to carry, and fast heat dissipation
• Easy installation, no need screw to install the case
• Support Raspbian, Windows, Macintosh OS, Linux, and Android systems
• Support Raspberry Pi board, PC, Macbook, smart TV, Android type-C mobile phone, and other digital devices

Specifications:

• Enclosure Type: Dual protocol (can support both NGFF/NVMe)
• Material: Aluminum alloy
• Color: Blue
• Master Chip: 9210B
• Hard Disk Protocol:
  • M.2 NGFF
  • M.2 NVMe
  • M.2 NGFF/NVMe
• Speed: 6Gbps @ 10Gbps
• Input Interface: Type-C
• Hard Disk Interface: M-key, B+M Key
• Compatible SSD Size: 2230/2242/2260/2280
• Weight: 73.4g
• Dimension: 105mm x 49mm x 13mm

• 1 x USB 3.0 to M.2 NVMe B+M Key Case
• 1 x USB-C to USB 3.0 cable
• 1 x Thermal paste
• 1 x Screwdriver
• 1 x Screw & Nut