Your shopping cart is empty!
-50%
-82%Extension wire is for extending the Cube Servo or sensors wire in case it is not long enough. Male connector can be connected to Female connector and vice versa. Extensio..
$1.25 $0.23 Ex Tax: $0.23
-85%This is a very useful tool to unlatch G15 and its accessories. It slid perfectly on every G15 slots to unlatch the lock. G15 cube servo and its connectors can be easily d..
$1.50 $0.23 Ex Tax: $0.23
-85%U-Joint usually work with a Cube Servo and a Rotatable Joint to create a joint of arm for a robot like our elbow joint or knee joint. Document:2D Drawing F..
$3.25 $0.50 Ex Tax: $0.50
-80%This is a SMD breakout boards (0.5mm pitch) for L/TQFP IC upto 144 pins to convert to standard of 0.1" which is normally use in breadboards and donut boards. You can use ..
$2.50 $0.50 Ex Tax: $0.50
-62%This is a breakout board for ATX Power Supply. It comes pre-solder and tested. Connect this board with an ATX Power supply where you can get it from most of computer shop..
$6.50 $2.48 Ex Tax: $2.48
-94%U-Joint usually works with a Cube Servo and a Rotatable Joint to create a joint of arm for a robot like our elbow joint or knee joint.Document:2D Drawing Files..
$3.75 $0.23 Ex Tax: $0.23
-70%This part works in rero robots as 'hangers' to tidy up your wires. Document:2D Drawing Files (PDF, DWG) 3D CAD Files (STP, IGS)..
$0.75 $0.23 Ex Tax: $0.23
-82%Extension wire is for extending the Cube Servo or sensors wire in case it is not long enough. Male connector can be connected to Female connector and vice versa. Extensio..
$1.25 $0.23 Ex Tax: $0.23
-75%Long Straight Turn Pin Single row 40 pin Pin pitch: 2.54mm..
$2.00 $0.50 Ex Tax: $0.50
-82%Description: This is a breakout board for 2020 PCB Connector 8 ways. It comes pre-soldered with the male connector. It converts the signal pins to standard of 0.1" which..
$1.25 $0.23 Ex Tax: $0.23
-94%U-Joint usually work with a Cube Servo and a Rotatable Joint to create a joint of arm for a robot like our elbow joint or knee joint. Wide U-Joint can fit 2 Cube Servo at..
$3.75 $0.23 Ex Tax: $0.23
-59%This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball ..
$5.98 $2.48 Ex Tax: $2.48
-55%Specification:M4 x 16mm (Length) Phillip pan head Material: Bright zinc plated..
$0.05 $0.02 Ex Tax: $0.02
-80%A ZIF (Zero Insertion Force) socket allows you to easily insert and remove chips from existing circuits. These are often used for chip programmers or when you need to tes..
$2.50 $0.50 Ex Tax: $0.50
-82%Extension wire is for extending the Cube Servo or sensors wire in case it is not long enough. Male connector can be connected to Female connector and vice versa. Extensio..
$1.25 $0.23 Ex Tax: $0.23
-83%Foot Plate can be used as foot palm or mimic as a wing of your robot!Document:2D Drawing Files (PDF, DWG)3D CAD Files (STP, IGS) ..
$3.00 $0.50 Ex Tax: $0.50
-86%
-78%Description: This is a SMD breakout boards for L/TQFP IC with 0.8mm pitch upto 44 pins . It converts to standard of 0.1" which is normally use in breadboards and donut b..
$1.00 $0.23 Ex Tax: $0.23
-72%Description: This is a breakout board for T/LQFP package of IC with 0.5mm pith upto 100pins. It convert to standard of 0.1" which is normally use in donut board..
$1.75 $0.50 Ex Tax: $0.50
International
Singapore
Malaysia
Thailand
Vietnam