Components

AI HuskyLens With EDU PICO : Step-by-Step Guide

This comprehensive guide will walk you through using the HuskyLens AI camera with the EDU PICO board...

No PC No Problem: Flash Raspberry Pi OS with Network Boot

Simplifying Setup process with Raspberry Pi Network Boot - Now you can load Raspberry Pi OS or other supported 3rd party OS into a microSD card, or SSD without having another computer...

How to make Smart USB Relay Using EDU PICO

Learn how to create a Smart USB Relay using EDU PICO board...

DIY Music Player with Gestures using EDU PICO

Learn how to craft your own MP3 player with gesture control capabilities using EDU PICO...

Play Game using Joystick on Maker Uno RP2040

Using a joystick connected to the Maker Uno RP2040 to play PC games via USB native way...

DHT11 Sensor Data Logging using Maker Uno RP2040

Reads temperature and humidity data from a DHT11 sensor with Maker Uno RP2040, and logs data to a CSV file...

Interfacing the LD2410B Human Presence Status Sensor using ESP32

In this short tutorial, we will show you how to interface the LD2410B sensor using the ESP32 Module...

Building a Traffic Signal Controller with Raspberry Pi Pico and TM1637 in Circuitpython

In this tutorial, we'll guide you through the process of creating a Traffic Light Controller using the Raspberry Pi Pico and CircuitPython...

Interface an LD2410B Sensor with USB-UART Converter

In this tutorial, we will show how to interface the LD2410B sensor with a USB-UART converter, enabling communication between the sensor and a computer or smartphone....

Getting Started with Maker Feather AIoT S3 (Arduino IDE)

Getting started with Maker Feather AIoT S3 (Arduino IDE) with basic system. There are 7 complete example from totally basic until medium level...

DIY Auto Tissue Paper Dispenser with micro:bit

An auto tissue dispenser device is designed to optimize consumption and avoid unnecessary waste, also it allows fast access and quick refilling...

DIY Wooden Robotic Dinosaur (with Remote Control)

INTRODUCTION This is the tutorial to modify the DIY Wooden Robotic Dinosaur (with Batteries) to a remote control DIY Wooden Robotic Dinosaur using the small receiver and  the transmitter with anten....

Push-up Counter Using Arduino UNO and Ultrasonic Sensor with LCD (16x2)

Push-ups are a very useful technique to build muscles and strengthen your upper body. However, it must be done in the right way or else it may cause injuries or pain in the back or shoulders. On the o..

Installing RetroPie on CM4 eMMC with RetroFlag GPi CASE 2

Disclaimer: Raspberry Pi CM4 is NOT meant for beginner. This tutorial assumes you are familiar and have prior knowledge on Raspberry Pi boards, CM4 boards, how to use raspi-config, what is eMMC, what ..

Security System Using Raspberry pi and ArduCam 16MP Autofocus

In this tutorial, it is demonstrated how to use raspberry pi and ultrasonic sensor to build a security system....