Makers

Powered by Raspberry Pi Mark Obtained

The popular Maker Pi series that we built using either Pi Pico or RP2040 silicon is now officially certified as Powered by Raspberry Pi...

Get Started with Maker Feather AIoT S3 using CircuitPython

This guide will show you how to set up the board for CircuitPython, followed by some simple examples to help you get familiar with programming it...

Security System Using Raspberry pi and ArduCam 16MP Autofocus

In this tutorial, it is demonstrated how to use raspberry pi and ultrasonic sensor to build a security system....

How to Make a DIY Concrete Vase with a 3D Printed Mould

Ready to get started making concrete planters? You’ve come to the right place. I've been wanting to update the planter I had in my home office, it's very boring, basic and white so I d....

Measure The Ambient Temperature With Raspberry Pi Pico And Grove Temperature Sensor Using Arduino IDE

VideoHardware PreparationFor this tutorial we will need the following componentsDCIM\101MEDIA\DJI_0277.JPGRaspberry Pi Pico Microcontroll....

Interfacing Raspberry Pi Pico With 0.96" IPS Display And DHT22 Using Arduino IDE

VideoHardware PreparationFor this tutorial we will need the following componentsDCIM\101MEDIA\DJI_0277.JPGRaspberry Pi Pico Microcontroller Board0.96-inch 160x80 IP....

Gesture Control With Maker Nano RP2040 And APDS9960

VideoHardware PreparationFor this tutorial we will need the following componentsDCIM\101MEDIA\DJI_0277.JPGMaker Nano RP2040: Simplifying ....

Metal and Wet Waste Separator Using Maker Uno

Waste separation is a good start to living a green life. Metal and wet waste are essential to be separated because sometimes the metal waste is dangerous if..

Interfacing Maker Nano RP2040 With DHT22 And Sparkfun SERLCD

 Video Hardware PreparationFor this tutorial we will need the following components Maker Nano RP2040: Simplifying Projects with Raspber....

Getting Started With Sparkfun RedBoard Qwiic

On top of that, there are few additions that make the Sparkfun Redboard Qwiic unique. With the improved AP112 voltage regulator, this RedBoard gains a more robust 3.3V regulator that provides it more ..

Measure The LPG Gas Using Maker Nano RP2040 And Gas Sensor MQ-9B

VideoHardware PreparationThe hardware setup for this tutorial is as shown belowMaker Nano RP2040: Simplifying Projects with Raspberry Pi RP2040Grove - LCD RGB Backl....

Interfacing Maker Nano RP2040 with Grove LED Bar and Grove Slide Potentiometer

 Video Hardware PreparationThe hardware setup for this tutorial is as shown below Maker Nano RP2040: Simplifying Projects with Ra....

Maker Nano RP2040 Interfacing With Maker Line Using Arduino IDE

 Video Hardware PreparationSince this is a continuation from the previous tutorial the additional that we will need is the Maker Line. ....

Maker Nano RP2040 Interfacing With Maker Drive Using Arduino IDE

VideoHardware PreparationThis are the list of items used in this tutorial.Maker Nano RP2040: Simplifying Projects with Raspberry Pi RP2040Maker Drive: Simplifying H-Bri....

Monitor Soil Moisture With Maker Nano RP2040 And Maker Soil Moisture Sensor

 Video Hardware PreparationThis are the list of items used in this tutorial.Maker Nano RP2040: Simplifying Projects with Raspberry Pi RP2040....