Arduino Pro Micro Compatible - Pre-soldered Headers

This is the Arduino PRO-Micro Compatible board. The Pro Micro is a super tiny, thin, Arduino compatible board with an ATmega32U4 as the main microcontroller. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with a bulky external USB interface.

This tiny little board does all of the neat Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs (Digital I/O) as well as hardware serial connections Rx and Tx.

Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.

There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.

This board comes with pre-soldered header pins. It fits perfectly on a breadboard. :)

Note: You need a micro USB to program and power the board. If you don't already have one, you may get them here.
 

• Arduino PRO Micro Compatible
• ATMega 32U4 running at 5V/16MHz
• Supported under Arduino IDE v1.0.1 and up
• On-Board micro-USB connector for programming
• 4 x 10-bit ADC pins
• 12 x Digital I/Os (5 are PWM capable)
• Rx and Tx Hardware Serial Connections

• Getting Started with Arduino - PRO Mini (compatible with Arduino PRO Micro)
• Loading Program to Arduino Pro Mini (compatible with Arduino PRO Micro)