RPi Compute Module 4 U.FL Antenna

$5.63
Cashback: 3%
Availability: Long Lead Time

Buy locally from a partner

Country:
Description

This antenna kit is launched in conjunction with the Compute Module 4 from the Raspberry Pi Foundation. CM4 with built-in wireless models comes with an onboard U.FL connector for an external antenna, thus this antenna kit. This Antenna Kit is certified for use with the Raspberry Pi Compute Module 4. If a different antenna is used, then separate certification will be required, and this must be arranged by the end-product design engineer.

Note: The U.FL connector is only populated on Compute Module 4 with Wireless, the non-wireless variations/models DO NOT come with a U.FL connector and wireless metal "can".

This antenna kit comes with SMA (Female) bendable (0º to 90º) antenna and RF cable with RP-SMA (male) with MHF1/U.FL connector and is 205mm length. You can mount the SMA antenna to an external case/enclosure to extend the wireless signal.

Note: CM4 (with wireless) is capable of switching the use of onboard PCB antenna or external antenna from software/IO.

 

Warranty Period: 12 months
Features

Features and Spec:

  • Antenna
    • Model number: YH2400-5800-SMA-108
    • Frequency range: 2400-2500/5100-5800 MHz, dual-band
    • Bandwidth: 100–700MHz
    • VSWR: ≤ 2.0
    • Gain: 2 dBi
    • Impedance: 50 ohm
    • Polarisation: Vertical
    • Radiation: Omnidirectional
    • Maximum power: 10W
    • Connector: SMA (female)
    • Dimensions: 108 mm × 10 mm
    • Shell material: ABS
    • Installation: Screw
    • Operating temperature: -35 to +75°C
    • Weight: ± 3 g
  • SMA to MHF1 cable
    • Model number: HD0052-09-A01_A0897-1101
    • Frequency range: 0–6GHz
    • Impedance: 50 ohm
    • VSWR: ≤ 1.4
    • Maximum power: 10W
    • Connector (to antenna): SMA (male)
    • Connector (to CM4): MHF1
    • Dimensions: 205 mm × 1.37 mm (cable diameter)
    • Shell material: ABS
    • Operating temperature: -45 to +80°C
    • Compliance: For a full list of local and regional product approvals, please visit raspberrypi.org

Packing List
  • 1 x Antenna Kit for Raspberry Pi Compute Module 4
Resources
Q & A (3)

Ask a question

Reviews
No Review Found

Tags: Antenna Kit, external, VSWR, MHF1, SMA, 50 Ohm Impedance