Your shopping cart is empty!
Jetson Nano Beginner Kit
- Brands Kit by Cytron Code: CK-JN-BG
This is Jetson Nano Beginner Kit. The kit includes everything you need to get started with the Jetson Nano AI development board.
It comes with:
This bundle is all you need to get started with the NVIDIA Jetson Nano Developer Kit! With a clear acrylic case, a camera mount, and the 8MP camera module, you can run all sorts of computer vision and machine learning projects on the Jetson Nano! Get connected via dual-band WiFi and Bluetooth 4.2 network with the Intel AC8265 Wireless Module with antennas (recommended hardware by NVIDIA). Included is also a 5V 4A Power Supply to allow you to harness the full capabilities of the Jetson Nano.
This kit also comes with 64GB, Class 10, U1, A1 grade of microSD card from Phidisk, and USB microSD Card Reader and Writer for you to load the JetPack.
Here's NVIDIA Jetson. The Jetson Nano delivers the performance to run modern AI workloads in a small form factor, power-efficient (consuming as little as 5 Watts), and low cost. Developers, learners, and makers can run AI frameworks and models for applications like image classification, object detection, segmentation, and speech processing. The developer kit can be powered by micro-USB or 2.1mm DC Barrel Plug and comes with extensive I/Os, ranging from GPIO to CSI. This makes it simple for developers to connect a diverse set of new sensors to enable a variety of AI applications.
Jetson Nano is also supported by NVIDIA JetPack™, which includes a board support package (BSP), Linux OS, NVIDIA CUDA®, cuDNN, and TensorRT™ software libraries for deep learning, computer vision, GPU computing, multimedia processing, and much more. The software is even available using an easy-to-flash SD card image, making it fast and easy to get started.
The same JetPack SDK is used across the entire NVIDIA Jetson family of products and is fully compatible with NVIDIA’s AI platform for training and deploying AI software. This proven software stack reduces complexity and overall effort for developers.
This kit also comes with 64GB, Class 10, U1, A1 grade of microSD card from Phidisk for you to load your JetPack. However, this microSD card comes straight from Phidisk and it is BLANK/EMPTY, so there is NO Operating System image in it. Please download the BalenaEtcher to load your JetPack image into the microSD card so it can further boot the Jetson Nano :)
To make it easier for you to load your MicroSD card with JetPack (popular Operating System for Jetson Nano), we also include a cute little USB microSD Card Reader and Writer together in the package. It's compact, lightweight and it's wicked fast. Supports up to 128GB SDHC cards! Simply slide the card into the edge, flip it over, and plug it into your computer's USB port. No driver is required, it shows up as a standard 'Mass Storage' device under any OS. Download the BalenaEtcher to load the JetPack into the MicroSD.
To power up your Jetson Nano, this kit comes with a 5V 4A 2.1mm DC Barrel Plug power adapter.
The following shows an NVIDIA Jetson Nano Developer Board that connects with this adapter:
The Power SMD LED will light up if the board is powered up. Since this kit includes a power adapter with DC Barrel Plug (2.1mm), a mini jumper is needed on J48 (to short both pins, also included in the kit).
The NVIDIA Jetson Nano development board will have a power load during the running test. When you use a 5V 4A power supply, you can satisfy most application use cases. Under a stress test, the CPU and GPU will be in a full load. At the same time, the whole system can reach 3.5A, and the 4A power supply can meet all the needs.
For a little bit more fun, we also included a Raspberry Pi camera module, an acrylic case, and an acrylic camera mount. Since the NVIDIA Jetson Nano development board does not come with any wireless module, you will also get an AC8265 WiFi Bluetooth NIC Module.
Raspberry Pi 8MP Camera Module V2 is a camera module developed by the Raspberry Pi foundation but is fully compatible and works well with Jetson Nano. It features an ultra-high quality 8MP(megapixel) SONY IMX219 image sensor (up to 5MP on the V1 camera board), and a fixed focus lens. This V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p @30fps, 720p @ 60fps and 640x480p90 video.
Check out this demo of Jetson Nano interface with Raspberry Pi Camera Module V2, by JetsonHacks:
AC8265 WiFi Bluetooth NIC Module for Jetson Nano with M.2 interface can be fixed to Jetson Nano for wireless communications offering WiFi and Bluetooth. The wireless card is fixed onto the Jeston Nano board by screws and the antenna can be attached to our acrylic case. It requires no driver installation and supports 5G/2.4G dual-band wifi, wide network coverage, coupled with 3db large gain dual antenna, even if in the complex wireless environment with multi-interference, it can also have good wireless penetration, making data reception smoother.
The kit includes NVIDIA Jetson Nano Development Kit Rev.B01, 64GB Micro SD Card, USB MicroSD Card Reader and Writer, and 5V 4A power adapter, Clear acrylic case, Clear acrylic camera mount, Raspberry Pi camera module and AC8265 Wireless Module
USB microSD Card Reader and Writer: