Note: Motor's warranty period is 3 months from the purchase date.
SPG30HP series is a high power range of SPG30 gear motor which provides higher speed and higher torque compared to its SPG30 sibling. But please note that higher power also means it will draw more current and consume more power.
We have been carrying the SPG30 motor for quite some time and it serves the makers community well. This motor is mounted with a 10:1 gearhead that can produce 49mN.m torque with 1100RPM (no load). The maximum current of this motor may exceed 5 Amp, so please make sure you drive it with a DC motor driver that can withstand at least 5 Amp current.
You may need a bracket to fix the motor at the desired location.
You should consider getting the plastic wheel if you are building a wheeled mobile robot.
Alternatively, get the metal key hub so that you can connect the motor shaft with a foreign part easily.
Warranty Period: 3 months
Features
Rated voltage: 12VDC
No load current: < 0.3A
No load speed: 1100 RPM
Rated load torque: 49mN.m (0.5kgf.cm)
Rated current: < 1A
Rated load speed: 865 RPM
Weight: 160g
Gear ratio: 10:1
Shaft: D-shaped with 6mm diameter, 15.5mm in length
Specifications
Motor Specification
Voltage
12VDC
Speed (RPM)
1001 - 2000
Torque (kgf.cm)
< 1kgf.cm
Gear Ratio
10:1
Current
< 1A
Diameter Motor
37mm
Encoder
No
Packing List
1 x 12V 1100RPM 0.5kgfcm High Power Brushed DC Geared Motor