-10% OLED I2C 0.96Inch 128x64 Blue Display

OLED I2C 0.96Inch 128x64 Blue Display

    • $5.63
    • $6.25 -10%
  • Ex Tax: $5.63
    • 50 or more $5.00
  • Cashback: 3%
  • CytronCash Balance: Login
  • Availability:
  • Product Code: DS-OLED-MOD

Buy locally from a partner


Note: Starting from 13th Aug 2021 onwards, this OLED Display is shipped with pre-solder headers.

Note: Starting from 15th Sep 2020 onwards, the OLED module comes in green color PCB, the OLED display is still blue color.

This attractive miniature OLED (Organic Light-Emitting Diode) display with 128x64 resolution at a 0.96-inch screen size comes in handy when you wish to add a display to your project.

This OLED display is made of 128x64 individual blue OLED pixels. As each of these pixels emits light on its own, it doesn't need a backlight panel like the classics 2x16 LCD display. Also because of this characteristic, OLED display can produce high contrast texts/images and it's easily readable even under bright light. It can really display tons of information despite the compact size.

OLED 128x64 Screen Animation
Credit to Adafruit for SSD1306 library

This OLED display uses an SSD1306 driver chip and can be controlled via the I2C interface. Although there's a 3.3V LDO (Low Dropout) voltage regulator built in this OLED module, SDA & SCL lines are not protected/level-shifted in any way. Hence we recommend using 3.3V only for this OLED display. Use 5V for supply and logic levels at your own risk. Otherwise, you may use any logic level converter on the IO pins for that extra safety.

The I2C address for this OLED display is 0x3C, NOT 0x78, or 0x7A as printed on the back of the OLED board. Please remember to modify the address in your code to 0x3C in order to communicate with it. This I2C address can be modified in order to interface two OLED displays by using one host device. You just need to desolder the resistor near label '0x78' and solder it back to the two pads nearest to label '0x7A' as shown below. By doing this, the I2C address of the OLED display will become 0x3D

I2C Address: 0x3C or 0x3D

Warning! This modification is not recommended for beginners who have just learned how to solder as it involves SMD components and if the board is overheated, you may damage the OLED panel permanently.


  • Overall Module: 27.7 x 27.2 x 3.8 mm
  • OLED Panel only: 26.7 x 19.3 x 1.7 mm


  • Resolution: 128 x 64 pixels
  • Display Area: 0.96 inch diagonal
  • Color Depth: Monochrome Blue-on-Black
  • Emitting Color: Blue
  • View Angle: Min 160 degree
  • Built-in Controller: SSD1306
  • Interface: I2C
  • I2C Address: 0x3C (can be modified to 0x3D)
  • Supply Voltage (Vcc): 3.3V
  • Logic Level (SDA & SCL): 3.3V
  • Dimension (Overall Module): 27.7 x 27.2 x 3.8 mm
  • Dimension (OLED Panel only): 26.7 x 19.3 x 1.7 mm
  • Comes Pre-soldered with Header Pins, 13th August 2021 onwards.
Packing List
  • 1 x OLED I2C 0.96Inch 128x64 Blue Display
  • 1 x Straight Pin Header (Male) 1x4 Ways
Q & A (13)
Hi,when I tested my display with the examples, it only worked when it was set to 128 by 32. this is the 128 by 64 version is it not? ( Joseph, 13/03/2021 )
Hi, you may drop an email to support@cytron.io for further technical assistance. Thanks:)
Do you need to unsolder the resistor from the 0x7b to center position and then re-solder the same resistor to the the 0x7a to center position to change the slave address? ( Ed, 28/01/2021 )
Hi. You need to unsolder and resolder the resistor in order to change I2C address. You may drop an email to support@cytron.io for further technical inquiry. Thanks:)
is it already soldered ? ( arif, 11/01/2021 )
Hi. The header is not readily solder on the lcd. Thanks :)
can you soldered the pin?(i dont have solder) ( Muhammad Akmal Syazwan Bin Abas , 17/04/2020 )
Hi, we're sorry as during this MCO period, soldering service is currently not available as we have limited staffs. We're sorry for any inconvenience caused. Thanks :)
Could you please give the board complete dimension? ( Ameesh, 24/09/2018 )
Hi, please email to support@cytron.io.Edit: We've updated the product description. Please find the dimension under Specifications. Thanks!
Can work with ESP32? Any library suitable to use with ESP32? ( Spg, 24/02/2018 )
Hi, it can be used with any microcontroller with I2C interface, including ESP32. However (currently) we don't have OLED library for ESP32. Thanks.
why when i put supply to vcc and gnd it doesnt light on? oled ( hazwan haikal, 23/02/2018 )
Hi, try to program OLED to display. For further questions, please visit to our technical forum for similar question or post your question there, as this session is only for short inquiry. Thanks.
Hi, when will this be in stock and/or what is a good substitute for this? Thanks! ( Jon, 20/10/2017 )
Hi it takes around 2 weeks to be restocked. Thanks.
Hi, do you the SPI version? ( Lucas, 24/09/2017 )
Hi, sorry, currently we only carry I2C version. For further questions, please visit to our technical forum for similar question or post your question there, as this session is only for short inquiry. Thanks.
how to test it ok? mine not responding ( lee, 26/07/2017 )
Hi, please email to support@cytron.com.my with clear picture of your setup and code. Our support team will assist you regarding your problem. Thanks.

Ask a question

Reviews (161)
  • 4.9 out of 5
Total Reviews (161)
  • 5
  • 4
  • 3
  • 2
  • 1

Tags: i2c, oled, module, blue, lcd, ds-oled-mod